Search results

thank for the tips, ya if I look at the changes the only thing over the last few months is firmware updates. I am running in GPS mode, I have calibrated the compass many times and still getting same results. I will go look at the manual page 41, and I have not set up any bells and whistles...

kilby thanks for getting back with my just saw you email, I have seemed to knock out my problem and at the same time I have added a downlink system, it always great to see what you are looking at. it make framing much better. if you have time on the back side of this weekend I am around all next...

here are a few from the other day, it was cloudy. These are all a result of the guessing game of putting the copter in position an guessing what you are shooting, however over the last day I now have a downlink system where I can see, FINALLY!!!! cheers all

I am wondering if anyone has had this happen to them and what it may be. If I go out about .5km turn my copter around, on the way back the straight forward stick will be off to the left about 20 to 30 degrees off center I am not sure when it started happening, I could say it was around a time...

Hey Terry, not sure if your around and when but at some point I am wondering if we could meet up. I would like to look at your f550 and try to figure out, why I am still getting vibration into my mount. For photos I do not have a problems however on the video side I am getting some small hi...

sorry guys I just noticed a post from three days ago asking the same question. I am trying to delete my original post now.

I am looking to gather information on the type of battery people are using for the s800. I know I could sift pre-order s800 post and find some stuff, I just figure I could ask here and try to consolidate information of batteries in to one post. The pre order post is starting to get fairly long...

I everyone I have a s800 and trying to figure out the best way to add a photo mount to it. I know the zenmuse is coming out but other then using the DJI camera mount I am looking for some options. Something now and more tangable at the time. I would like to see photo higher come out with...

I would go about 15 meters, around pousition 1, just slightly back, more left of the number not by much. if not that I would then go with two if you did that as a panoramic of 2 to 3 shots. You photos look good already but I think you fields are secondary and if you could see them in your photo...

yep those those copter, in the night time i think they go to ninja school. I stuck my hand in to check something, took a hit did not think much about it, until a few minutes later when I looked down to see my finger looking like hamburger meat. There were five slices and with some depth in the...

Try going back in the assistant software, set you two or three position switch to enter manual, and one or both GPS, ATT-GPS. I am not sure but when I was trying get cute with my set up I was trying to set my controller up so I could trigger the Fail Safe or return home mode on my controller...

what is your voltage I can only speak from my own experiences. Red lights sent me boggling, twice, each time It was related to the voltage I had my battery thresholds set at. The first time when I did not know anything It took be a while to figure out that the voltage my battery was putting...

take the props off and start there an see if the motors are responding accordingly as you lift, tilt etc...., also if you ESC are programable did you configure them before hooking everything up.

tstrike Its a morph to say, It a xaircraft mc130c but because of all the vibration off the frame and the motor I am constantly building a mount my own that attaches to the xaircraft frame. I have been shaping Aluminum, drilling here, adding gel pads from Dr. Sole inserts there, lots of tape...

Here's a quick vid a neighbor and I did yesterday, just practicing some video moves, the first two are pretty much the same, the 3rd and 4th are kinda the same but from a different angle, and the 5th one is fun. I have a little vibration still but I know what is causing it. I plan on fixing that...

vip is right also, when you are in that time when the craft is light enough to move, between that and takeoff, its very crucial time, it is not good to sit in that zone, make sure you keep applying throttle at a decent rate until you are up, and also sit on the stick to ever so slightly counter...

did you calibrate your unit. I am not expert but I will tell you what I think I know. The first thing I would do even if you did I would re-calibrate it, the instructions are in the manual but to do so, flick you flight mode switch up and down 6-10 quickly, when you get done with that a blue...

Oylore quick question, where did you get what looks like gel pad used for cushion between frame and the landing gear? How do they work? thanks Jack

Ya I am dumping the xaircraft frame, even though aerial photography is no problem, at times I am still getting vibration in the video side, enough for me to dump as an issue. I have had some good results over the past few months but I am building a very heavy frame and still having an issues, no...

I am in the midst of thinking about purchasing a F550 and not sure which way is the best to go. My question is for people out there whom have purchased the kit. Are they happy with the DJI motors, have they had any problems if so what were they? The other way I am thinking of going about this...