Search results

Everything small in San Diego is destroyed price wise..... car dealers get commercials shot for hundreds..... days of it, high risk, lame.....real estate market is down to $199 with an edit.... Guys flying over crowds of people at marathons for free.....

the cell counts not the issue, it's the volume and density... ie Mah and C are too big.....hint hint

several, but you need the size..... boca bearing is the most local diverse but the ebay and china are where most this comes from

you just need to spec the size then order them from a bearing place........ if you have a burned up motor, get the bearing out and hit it with a micrometer.... in my experience i just get spare motors, changing bearings is hard and usually expensive endeavor that's not garunteed...... breaking a...

it's not about the packs cell count or voltage and all about the amp draw and the plugs rating..... generally deans and xt60 are 50 or 60 amp plugs... if you never hit that, then technicaly your fine till you do..... because we run pairs of cells, we make it so if one pack was not plugged in...

it's 2 grand,,,, throwing money at stuff always fixes it.....hahaha. does it have a variable timing and speed of simonK 400hz? never looked at them the calibrating to 110 is if you have a spektrum radio and accidentaly calibrate them....

if you want to go around it, get labels made and heat shrink them on.....

you want to look at the main plug as the pilot, lets you know if it isn't making good contact, if carbon build up is making an issue, if flux is on the connectors, etc.... when that number jumps up that's when you look at cell, if that is still low, then it's the plug...

that sounds like your reading off each cell, in which case 0-3 is great, 4 and up is leaving ya,,, over 8 on a 6s is sucking wind..... the cells as a whole was how i read his numbers and that includes the plug the power goest through.... i don't even look at the balance plug cause i'm monitoring...

22-24 is excellent,,,,, you will notice that rises as you go and will be acting up by 40-50. storing them in the right environment/state, no over discharging, no over amp the charge rate all keeps them healthy

welcome to the habit..... tell Mitch and Patrick kloner said Hey.....

that u7 experience is very different than what i'm seeing..... were 50 flights in with gh3 and it is performing well,,,,, but, the kde are really nice too.... i got them 4014 going on a disco soon to look at them next to the 3520.... i blew a bearing already in a kde 3520,,,, never hit...

it is an APM in the yellow case data logging along with that e filed sensor that is logging to a dac,,, the data from both gets meshed like he mentioned....

yep, technicians lic

Red Epic aerials, GH4 handheld and gh3 bts.....

gh3..... thanks went out to an fpv meet this weekend. Took my hexacrafter 1100 out with the gh3 3 axis and my disco..... dam disco started making jello and by 5 flights was trying to flyaway so that footage isn't as good as it shoulda been, none the less, what a blast.... there was 12 of us...

if your shooting for 3d flight, not mushy is good, but when your trying to film stuff, that's how we get the whole package to play together...... gimbal keeps up with stick input, etc..... ap isn't suppose to be a sport if that's what your into.... obviously when somebody says it's too touchy...

did it....

look into adding expo to the radio... futaba add -50 expo, spektrum/jr try +50%..... there might also be some of that available in the apm software