Search results

Yep. Not going to get that on the Naza.

Yep. Manual mode is full manual - maybe APM calls it acro? Those are your only 3 options with the Naza. Not exactly a Ferrari in the GOS and ATTI mode :)

Nikunj, There's no need to triple post. See the other thread. We need specifics for your exact motors.

Do you have a link to the exact motors? Hopefully a page with some data for the motor???

Unfortunately I can't find any specs for that motor. It also doesn't have a suggestion for prop size it can handle. So I have no idea what the thrust is for that motor, which is what you need to know to determine everything else. You need to have the motor capable of lifting the full weight of...

The frame is definitely heavy. As a comparison, the f550 style hex frames are about 155g. Obviously this one has some style to it. But realize you'll be fighting weight. Always! :) Do not get that power distribution board. Either solder your own squid or buy one that is better quality - and...

^^^^+1 It's good practice to check everything after a crash. The fact that you're having issues - proves that at least one thing has been effected - rule out what that is, and check the whole craft for any other potential issues before they cause another crash.

I have always installed the superX FC and the GPS on the CoG. I see with the align that might be difficult. Would there be room under the canopy to make a small "tower" for placing the GPS on top of the FC unit? On the TTRobotix Super Hornet review I did here (similar canopy style), I cut a...

Your calculation is correct. So you would need a battery that can handle 51.2 Amps at burst. This is the safe number - we will hope you never need to use it :) To determine the battery needed - you multiply the battery's amps (mah/1000) by the discharge rate (C). Example: a 10000mah battery...

The ESCs with a given motor, coupled with a flight controller, can be an issue. I had problems with the XAircraft superx and these SS motors using hobbywing ESCs. Same setup, no issue with the Naza FC instead. So make sure you do some research for people using all your exact components. There...

I would say the DJI that's used was better than the T-2D. I had a couple hiccups early on and then it was pretty solid after that. The newest is just the gopro4 version of the 3 axis. The only bad thing I head about the 3 axis was the tilt function control from the radio wasn't as smooth...

I've used both the DJI H3-2D and the tarot t-2D.

I like the Anderson's. Definitely need the right crimp tool to make it easy on yourself.

If they're twitching, it usually means they are not getting proper signal from the FC. Check ALL connections after a crash, but especially your servo wires and the ESC to motor connections.

It's hard to tell - because all the companies list/test differently. But the SS are good motors, especially considering the price. I'm not aware of single motors that are coaxial - but there are MRs designed to carry 2 motors per mount/boom. They are called X8 (opposed to flat 8). They have...

Take it slow with the FPV. It can be really wild. I started with the monitor and have yet to fully immerse myself with goggles. I still like to be able to look up and see what's happening. :)

SOLD! Hey folks, I have an Eagle Tree Vector Flight Controller with OSD and GPS than has been installed on a quad, and then NEVER FLOWN. This flight controller comes equipped with the full color OSD tat Eagle Tree is famous for. It has the power conditioner with the extended leads for...

You're referring to the extra port?

Hey Sean, welcome to MRF! Sounds like you got the bug like the rest of us. Believe me, you are NOT alone! :) You're right, the slow boat seems VERY slow. Fortunately there are more and more retailers here in the States that stock quality parts. Even Hobby King now has warehouses here (one just...

Welcome to the madness Alien! :) You definitely found the right place if you're looking for all things multirotor. What's the rig you're planning on building? Start a build log. Surf around and feel free to ask any questions you might have. Great group of folks here - very knowledgable and...