Search results

i don't think so, just use the turnigy frsky rx and tx on the gimbal.... or see if the two graupner rx's will bind to one radio, that would let you go back to one man control of a two man system.... if theres enough switches and sticks to control a pan and tilt along with flying the rig

with the 5.8 you will want to solder the power for it straight from an esc pad, skip powering it through core.... it is good to 6s

the whole point behind a disco is the internal power and filters..... keeps it clean both visually and rf if you suspect a problem with the board, start a trouble ticket at the tbs site and they will take care of you anytime you wire up a component to the pads, they need a signal and ground...

yes you run two 2.4 systems on one rig... one rc rx goes to the flight controller, one rc rx goes on the gimbal.... if you want video from both halves, same thing there, 2 video tx's on the craft, 2 on the ground..... it is hard to fly on a gimbaled camera but if staying los don't really need...

a lot of us are running this combo with awesome results.... something is wrong with something on the rig.... 7:30 is onboard live feed without a gimbal....

that's the downside to the available fastest lenses now, all manual, not bad for aerials though lumix 7-14 on gh3,,, still sharp just not the same

your motors are not straight, #3 is off alot#1 is pushing back just a little but will need a new log looked at to verify all them lines stay together better on motor output.... two of the four will oppose the other two as it fights or yaws, but they should intersect and look like a rainbow line...

if you don't have a prop balancer get that too, topflight is what i think mine says on it....

my goto lens on the gh3 and even more so now with gh4 for video is the voigtlander 17.5 f.95..... it is hard to shoot with anything else.... We have the 12-35 f2.8 and its alright. 14-140 is too slow.... like you mentioned 7-14 is slow and i have the rokinon cinelens with t2.2 but it's crappy...

logs uploaded to http://log.xaircraft.com and get us a link to them

i don't have any of it here to check out,,,, try 160-160-140-150 then 100-100 atti.... no, i run the zippy compact 2700 6s Do you have a temp gun or way to check a motor temp? the motor that drops most noticeable? look at it,,, my props are crazy balanced,,,, you got these magneticaly balanced?

in that video, why is an esc in program mode? on purpose? is this simonK firmware?

yea, is that what you got? look shiney

ham stuff is all line of site,,,, if anything is between the antennas, make it so there isn't.... cp antennas have a null out the top and bottom, problem having it on it's side is the null can point at you..... kinda like up and down does straight overhead. never point the top of the antenna on...

I'm on naza v2, full length booms if i had to guess your biggest problem is the props.... i've only tried tiger, one of my partners built one with apc props and his does this almost as bad as yours.....

we've tried flying this thing and hit some problems getting a live feed out of it. I moved forward and bought the sd output wire for it, hoping it'll give live feed real time. think it's page 87 in the manual, my cable gets here monday

post your logs....

couple more,,, are any of the motors hotter than the others? take all the props off, fire up the motors and drag your nail along each motor, any feel rough? the extreme rearward cg improving it makes me think a front motor is sub optimal

weird lens/filter.... red epic

your running u5? 13" props? Those u5 don't take a special esc? was it better or worse on tiger vs jedi? mine are butter smooth..... what brand props are they?