Search results

Hi, In short 1. Taranis seams a good option but I have not tried it, Futaba seams to work well with DJI, I use an 8FG 2. I think the 2.4ghz is standard now but this may be different in the US 3. No this will not interfere 4. The 3dr module will only work with the ardupilot not the...

It looks great but I have some serious concerns over the reduction and frequency of the IMU to capture all the data to correctly stabilise the footage. Not to mention getting the timing in sync between the footage and data. I can only see this being used in conjunction with image stabilisation...

So is there any balancing required with the BMPC from the NEx

What is the adapter for the BMPC and how does the connect to the zenmuse?

You would be better using a simple gimbal controller if you just want to stabilise the barrel, have servos drive the barrel as if it was a camera.

Sorry no idea then, best start shouting at passing cars !!! I find chasing them too some times helps

By any chance do you have the gimbal function enabled?

Good to know its working now,

Can you post some picture of your set up and possibly screen shots from the naza assistant showing the sticks at mid point

Very cool, nice clean interface. I sent you a email with some feedback

I think the 16 waypoints could be a hardware limit of the Naza M, the software will plot 50 points but I am not sure if it will carry out the mission with 50 points.

I saw some information on a motor manufacturer specifying the mean time before failure, I think it was t-motor but I could be wrong. They stated a mean time before failure of around 160hrs, Based on this and a optimistic 15 minutes flight each flight, that 640 flights. However some...

Glad you got it worked out, I thought the naza light has a 50% auto take off? Sent from my iPad using Tapatalk

Taking off in manual needs a fair amount of skill, if you are sure about your connections and feeling brave hold the copter (securely) in you hand and raise the throttle to 50% rolling to the left and right should give thrust to counter the roll you apply. If it is the opposite then your...

Attitude is without GPS, best used for take off, you should be able to select it in the naza assistant. Did you check the orientation of the FC, GPS and the motor connections? Sent from my iPad using Tapatalk

Looks like your motors or props need balancing to remove the sideways jello that you have, otherwise looks great. Sent from my iPad using Tapatalk

It's a slow flip, is the flight controller facing the correct way and the connection to the motors checked? Try in attitude mode before GPS and maybe loses the landing gear until you get this fixed. Sent from my iPad using Tapatalk

I have never tried but it should work Sent from my iPad using Tapatalk

The unilog2 will only be able to connect to one esc and you would have to extend the cables. Why not go with the iOSD MK2 for the logging. Use the VTX for telemetry to a display Sent from my iPad using Tapatalk

It sounds like non of the zen's work without extending the legs Sent from my iPad using Tapatalk