Search results

I was very nervous when first taking to the air, resulting in some real bad crashes. I cracked two arms, but I found a plastic glue which restored the strength. These repairs survived subsequent crashes. Then some one mentioned it would be pertinent to practice with a flight simulator first. I...

What sort of price? Do you have the boxes it came in? Our import control is strict, if you do have the boxes we can say its a Sample, and maybe it will get through. Thanks Trevcharl

It seems to me there is a lot of superstition attached to drones. I would approach the man with the controller....er....if it is autonomous I would have a problem. I went flying in a deserted park near me, soon there was security companies riding slowly past, checking me out. They probably...

I just want to add it can do six channels and a serial output from the receiver is PPM. Otherwise if you Naze does not have a PPM input you will have to run the six wires from RX to FC.

Hi there, I have just got the Flysky FS-i6S controller and the FS-1A6B receiver. I will have to check the firmware on my APM Flight controller, the Controller can be set up with its touch LCD screen. If you download the manual for controller, they tell you how to bind the receiver to the...

Did you download the app to program your FC? Every FC has its own app, for instance APM has Mission planner, and others have Cleanflight or Betaflight. With a usb to mini usb cable you can set up parameters on the flight controller, and one gets an update for the firmware for the flight...

I dont know that flight controller, but there are FC's that need to be enabled before they will respond to any controller commands. To do this one has to move the left stick down into the right corner, for a few seconds. This is a mode2 controller where the left stick pushed forward, increases...

I dont see the connection points (There are no wires attached) The marking is a strange designation, one expects to see 2212/1200kv or something along those lines. Now to find a replacement one could do some physical measurements that will give you the first figure. 2212 means the motor is 22mm...

That speed controller seems suspect. Actually the esc takes DC and converts it to three phase AC. With AC supplied to the coils of the motors the impedance is quite high, but if for some reason one applies DC, the excess current will really heat up the windings. You will probably fond the wires...

Google Oscar Liang. He has come up with many "How to" instructions. He gives pros and cons of various items. He was the first one that came up when I googled him.....good luck!

I notice that "Controller" is the term used for the unit you hold in your hands with the joysticks and switches. This has a transmitter, which transmits on a radio frequency around 2.4ghz. It uses pulses with adjustable mark space ratios to "inform" the receiver what the joystick positions are...

My kit also came without a controller or receiver. I dont have much money so I opted for a cheaper controller, which is programmable. It might be pertinent to get something that you can program, and you will need an app for your computer as well. Many of these apps are free downloads. Your...