Recent content by jascamera

Guys, DJI said their 2.4G waypoint radio works fine with 2.4G radio. Anyone using this combo to confirm? I am using futaba. I tried to use a UHF from Thomas Scherrer, I get chattering servos and when I increase the power on the UHF, it completely resets the radio setting to default...

Harpia, Thank you very much. That helps a lot.

Just want to see if someone can clarify rather the Wookong M way-point needs a internet connection for it to work, or it can work base on the take off points?? I read the way-point manual and didn't find they mention about internet connection.

Guys, I have read the manual many time, but just want to double check with some of you who are more experience with return home switch, and GPS waypoint. I am about to test my new copter with waypoint. I just want to make sure be able to regain manual control in case waypoint and...

Guys, I am still in 5.14 firmware. Now I am working with the dji 2.4 data radio with Buletooth version. I only need to get one waypoint to work on a computer. Can I stay with 5.14, or I need to update to work with newer 2.4 data radio? I don't need blue tooth function. If...

Thanks guys, I got it holding nicely now. It actually takes more like 30 degree to stop all toilet bowel symptoms.

Deanot, GPS hold is perfect at hover now. But once I start moving forward, or backward, the aircraft will do a circle before coming back to a gps hover. Normally, I would be happy with the result, as I normally don't use GPS hold. But this new copter will be using with waypoint, so I...

deanot, Thanks for this info. First time heard of this. Will give this a try tomorrow.

Guys, Wonder if you guys have list to look for to fix this problem? I have calibrated the GPS a few times, copter flys nice in atti mode, but gps, it just do toilet bowl circles. Any other things that I can try?

Hey Guys, I have built a few setups with WKM and my own 900mm frame with success. This time, I want a lighter setup and change motors from Hacker to Avroto 3520 400KV with 17" carbon fiber props. I notice when I plug in the battery, sounds like 3 of the motor armed first and then...

Thank you very much. I will try to look at the frame and Prop balance and emi issues.

Wonder are you on Naza v1, or v2? Also, can you share your setting? Been working at it for the past couple if month, changed also esc too. Not sure what's wrong. I am mounting the motors on the under side instead in top.

Guys, I have a custom 650mm quad frame and was running 3s with 12x6 and it was flying fine at 4lbs, till I started mounting gimbal, then flight time wasn't good and not enough authority. Now at 8lbs, I want good flight time, so I am aiming to use 16" props with Multistar- 4822-390KV...

Guys, The last time I updated to 5.20, my copters with V1 wookong, it drops altitude and then couple of days later had an unexplained lost control on yaw and caused a crash. Ever since, I have just stayed with the old 5.14. Now, I have a newer setup with V2 GPS and IMU. It's...

In att mode. It's blinking yellow.