ChopperAddict
Member
Does anyone out there know if the above is possible ?
I am flying a 550 hex using a good 3000Mah 14.8v lipo, but only get around 5 minutes max. My reading on the web tells me that is a much better idea to have the ESC set to think they are sensing Nicad rather than Lipo so you do not get these heavy enforced heavy landings as I just did on a test flight this afternoon.
I was at about 100 feet when I realised I was getting red flashing from the MU, and despite bringing it down pretty fast, it still hit the ground far harder than I would have liked.
I do NOT use the voltage monitor in NAZA
Any suggestions would be gratefully received.
Ian
I am flying a 550 hex using a good 3000Mah 14.8v lipo, but only get around 5 minutes max. My reading on the web tells me that is a much better idea to have the ESC set to think they are sensing Nicad rather than Lipo so you do not get these heavy enforced heavy landings as I just did on a test flight this afternoon.
I was at about 100 feet when I realised I was getting red flashing from the MU, and despite bringing it down pretty fast, it still hit the ground far harder than I would have liked.
I do NOT use the voltage monitor in NAZA
Any suggestions would be gratefully received.
Ian