Stable gains settings for Naza / Disco?

[linter]

I'm looking for initial settings ideas for my nearly completed tbs discovery. I have very uneducated and nervous thumbs, so if you could recommend some expo TX settings, too, that would be great.

motors: ipower 2212Q 850
props: 10"
battery: 3s 4500 - 5000
escs: ipower simon-k flashed

thanks for any help you can offer!

 

[kloner]

with the simonK esc's you can kinda crank it up....... try 150 in the manual boxes across the top and 80 in the atti boxes and go try it. if it's nervous lower the manual gains, if it seems like alot of correction turn it up the manual section

 

[linter]

thanks. will give that a go. any thoughts about tx expo?

 

[kloner]

i use alot of it...... like 80% but that's a prefrence thing. makes you move the sticks alot but gives me absolute control

 

[linter]

thanks for that. i mighty try it around half of your 80 and see how it goes.

 

[kloner]

I need to video my fingers on the sticks sometime and show it over a video of it flying. like to get it so when i'm low and proximity i can really fine tune where i'm at without over correcting. bet when i'm near the ground i'm rolling the stick half way all around keeping the model straight and level

planes are touchier, but like this

 

[linter]

do the fingers video, esp with a split screen. could be very instructive!