Pheliciano
Member
We'd already registered as one of the first 200 but I'd been waiting for an email from you before sending the picloc back... Will send you an email now.
Picloc 3x setting experience etc.
- Thread starter BorisS
- Start date
redridinghood
Member
Missed the start line too. No 3 on the list. Email send.
redridinghood
Member
#3 no email response.
GeorgeM
Member
Hi,
I will reply to your emails this evening/tomorrow morning.
Very busy getting the new piclocs ready.
I am just waiting for cables for the external magnetometer to arrive. They were sent with the wrong plug that plugs in the magnetometer board !
In the meantime, we're doing other assembly work, so that mailing is speedier.
I'm very afraid that the Piclocs won't arrive to you guys for Christmas, but will arrive in the week between Christmas and New year.
DHL !! Please hurry up the cables !!
I will reply to your emails this evening/tomorrow morning.
Very busy getting the new piclocs ready.
I am just waiting for cables for the external magnetometer to arrive. They were sent with the wrong plug that plugs in the magnetometer board !
In the meantime, we're doing other assembly work, so that mailing is speedier.
I'm very afraid that the Piclocs won't arrive to you guys for Christmas, but will arrive in the week between Christmas and New year.
DHL !! Please hurry up the cables !!
yeehaanow
Member
Working for me. This is the latest FW I'm aware of. http://rotorpics.com/p3xv56/firmware/2012_04_29_P3X_v56_76/
Vojec
Member
GeorgeM
Member
http://www.rotorpics.com/p3xv58_14/PiclocToolz_v58_14.htm
This is the one shipping out with the new Piclocs....There is also a version for V1 Piclocs.
The documentation for it is not ready yet, nor are the tutorial videos, however for starters, there is a link to PDF to get you going.
This works very well with the Picloc-3X v1, and is AWESOME with the 3X v2.
The reason, is due to the upgraded gyro on the V2, and the little secret that 'surrounds' it.
More on this later.
Wishing everyone A Fantastic Christmas, and lots of good health and happiness for 2013.
George.
PS... after loading up the firmware.. if you get strange readings on your i1 to i5 inputs ( if using traditional RX ), press the Futaba or JR buttons in the RADIO TAB.
This will show these values correctly.
This is the one shipping out with the new Piclocs....There is also a version for V1 Piclocs.
The documentation for it is not ready yet, nor are the tutorial videos, however for starters, there is a link to PDF to get you going.
This works very well with the Picloc-3X v1, and is AWESOME with the 3X v2.
The reason, is due to the upgraded gyro on the V2, and the little secret that 'surrounds' it.
Wishing everyone A Fantastic Christmas, and lots of good health and happiness for 2013.
George.
PS... after loading up the firmware.. if you get strange readings on your i1 to i5 inputs ( if using traditional RX ), press the Futaba or JR buttons in the RADIO TAB.
This will show these values correctly.
Last edited by a moderator:
same problem here, throttle changing the id all gains not centered and inputs from tx on other channels in pictools with the dx6i and sattalite with the 58.14
Last edited by a moderator:
GeorgeM
Member
Thomb, Jesper,
Really strange !! DX6i works perfectly here...
see this clip ( save it ,then view ) -> CLIP
DX6i does not have different framerates (like DX8).. AFAIK.
Works on all power settings.... EU, France, and US.
Perhaps, there is something different in the DSM protocol (both) your radios are using.
But this can be resolved very quickly with a skype call.
How about tomorrow for a skype ?
contact me by email.
Really strange !! DX6i works perfectly here...
see this clip ( save it ,then view ) -> CLIP
DX6i does not have different framerates (like DX8).. AFAIK.
Works on all power settings.... EU, France, and US.
Perhaps, there is something different in the DSM protocol (both) your radios are using.
But this can be resolved very quickly with a skype call.
How about tomorrow for a skype ?
contact me by email.
Well i almost got it sorted, i have the new DSMX transmitter, on the dmx2 and dsm2 mode i get the wrong inputs.
Ive tried it with DSM2 only and all is perfect in the middle exept the throttle (channel1) it at max. will try to bind the sattalite again with throttle in the middle.
Getting there!
Thom
All is working perfect exept the throttle and rudder, when moving throttle the spectrum ID is changing and aileron doing nothing.
when i set the radio on dx7 in tools i see the throttle working fine on channel 7-aux2 and rudder still changing the spectrum ID and a bit on throttle.
Last edited by a moderator:
GeorgeM
Member
Thom... if you don't make it work, it is in my interest to get yours working well. This can be best done by a 15 minute Skype call, where I load special firmware into your Picloc, and I see the output from your DX6i.
I was also sent a DM8 ( Spektrum module for Futaba ) and this is now also working ( Pfenni....) !!
It will be added as a special firmware, and then integrated into the main firmware.
Thanks !
GM>>
I was also sent a DM8 ( Spektrum module for Futaba ) and this is now also working ( Pfenni....) !!
It will be added as a special firmware, and then integrated into the main firmware.
Thanks !
GM>>