PDB for octo

[Ti@goo]

Hello

Been thinking about this PDB for a X8 .

http://www.flyingtech.co.uk/cables-connectors/diy-octo-power-distribution-board-and-dual-ubec

The motors I will be using are T-motor Mn3520 Kv40o and Hobbywing platinum Pro 3aA.

I saw the Gryphoon PDB but its too big.

Do you think this is enough? Anyone has any suggestion?

 

[DroneTalk]

38amp x 8 = 304 amps, no good the one you linked to is only good for 120amps.

 

[Ti@goo]

I`m sorry, but from where did you get those 38 Amp?

My copter will have 9Kg AWG...

 

[DroneTalk]

Specs for the motor show max 38 amps

KV................................................................................................................400
Configu ration...................................................................................12N14P
Stator Diameter....................................................................................35mm
Stator Length........................................................................................20mm
Shaft Diameter.......................................................................................5mm
Motor Dimensions(Dia.*Len)..................................................Φ43×45mm
Weight (g)................................................................................................205g
ldle current(10)@10v(A).........................................................................1.2A
No.of Cells(Lipo).....................................................................................4-8S
Max Continuous current(A)180S............................................................38A
Max Continuous Power(W)180S......................................................1140W
Max. efficiency current..............................................................(4-13A)>83%
internal resistance................................................................................32mΩ

 

[DroneTalk]

They have a chart for 16x5 prop @ 22volts only drawing 20amps but I work from the max amps to be safe so at the 6s it's going to draw 160amps.

 

[Ti@goo]

Oh ok. Actually I was only looking to the chart. Thanks.

i`m thinking on buying the vulcan PDB for its size