Naza wiring question

[shyfx003]

Hi guys..I am about to start building my nextlevel 500mm frame.. i have a 4 in 1 harness with a jst tap..would it be a safer bet wiring up the naza unit to this instead of using a bec from one of the esc's?? or just add a seperate bec and leave the jst tap for adding other things later on??

 

[Tahoe Ed]

You want to wire the Naza VU to your harness. The VU supplies the power to the Naza. You should remove the red wire from the esc's after you have calibrated them.