mini hdmi to 5.8ghz Transmitter

[liamhorsley]

Im looking for a mini hdmi to 5.8ghz transmitter to connect to the nex 3 so i can see what its seeing from the ground, iv looked everywere with no luck, Can anyone help ?

 

[kloner]

most people use the HDMI2AV from amazon, you want the white one. There is one that is special to nex, or at least marketed towards but be careful, some are only PAL. It also takes a hdmi cable to get from the camera to the converter. We like the hyperthin cables

 

[liamhorsley]

how do i then transmit the output signal to my reciver

 

[kloner]

the hdmi2av has a composite output that the vtx can transmit. I take the case off the converter, unsolder the rca plugs and solder in a servo wire that connects straight to the immersion vtx. nex cameras power the hdmi2av so all you would do if not modded like this is make an rca cable come from vtx to converter.... center pin is signal, outer is ground.....

 

[Bartman]

I think he's over in the UK so he'd be on the PAL format.

 

[kloner]

that would make the one you got that didn't work,,, work.

http://www.ebay.com/itm/like/111471695500?lpid=82

 

[Bartman]

ha ha , good memory, i've got a couple of them at this point, one is supposed to work but i never got around to trying it. i don't know if it would work on the NEX3 though.

hopbbytoys77.com i think? ebay too.

 

[RobertoMFS]

Hi Guys, The hdmi2av add some notable latency?
Thanks


Sent from my iPad using Tapatalk HD

 

[PMaughan]

If you're using PAL I'd recommend the black hdmi2av. I've found that some of the white ones don't like 50hz from some cameras, namely the GH4, some do work though, but black ones I've got work...
Pete