HDMI Converter setup

[photobobga]

I just received a converted HDMI card for my Sony NEX5. There were no instructions... the label on the converter shows four wires, two for video and two for power. There are only three wires coming out of the converter, brown, red and mustard colored... just like a servo wire. Can anyone help with the required setup of this please. The video feed is going into a DJI iOSD.

Thank you!
Bob

 

[kloner]

it is an analog output, typicaly there is a ground, video signal and possibly an audio signal. usualy power is a usb adapter if it's the hdmi2av but the nex powers the hdmi cable so it shouldn't need power... if it's not this type, get us a picture

typical is red = +5v, brown = ground, mustard = video signal

 

[Bartman]

Kloner's right, the Kopterworx HDMI converter takes power (With most cameras) from the camera via the HDMI cable. the red wire is unused, dark brown is video ground, mustard is video positive.