DJI with FPV

Kilby

Active Member
You should be ok with that positioning. I was mainly worried that you had the rx up front just above the vtx.

I set mine up so I had the RC rx up front (with a satellite) , then the vtx in the back with the GPS centered and up above all of it.
 

rwilabee

Member
Here is what I finally ended up with to get the vtx antenna further away from the gopro so it wouldn't interfer with the signal to the ground.

Rich
View attachment 2133
 

Attachments

  • receiver2.jpg
    receiver2.jpg
    135.2 KB · Views: 347

Wavev

New Member
I have the identical setup and noticed white lights while after turning on vtx. Question.
? Are you using a power distribution board? And I didnt see a secondary battery to power your vtx. Is the main batter powering vtx and motors?
 
Last edited by a moderator:

Top