Search results

Thanks, I have tried man different combinations. From x negative 5 to 5 and the same with y and z but didnt had any effect. The problem is also present in ATTI mode but not so bad like GPS and ATTI doesnt use the compass.

I think it happens in GPS mode the most. In ATTI its a little better. I got my Naza in February this year, dont think my supplier will care about it. I just want to know if this is ok and happens with all Nazas or my Naza is faulty. Maybe increasing only thr Roll gain helps? So it moves back to...

I'm having this problem since a long time and already posted it on 2-3 boards but couldnt find a solution :-( But maybe one has the some problem or a way to fix it. I have the Dji Naza + GPS and when flying forward and doing a little strafe on the left or right, my copter stayes in the wrong...

Got some close up footage of two World War 2 anti-aircraft gun towers in Austria from my flight yesterday :) Around 60 meters altitude:

My newest two videos, a flight over the Prater in Vienna/Austria (amusement park) and a flight around an old harbor http://www.youtube.com/watch?v=YuXxZ_vPEuw

Just dont mix bearings on the same motor or the whole quadrocopter? Maybe the 4 motors could spin slightly different with different bearings.[/LEFT]

Some nice castles from Austria with my Dji Naza, best video so far by me :)

I tested all four motors yesterday. The shaft and bearings are all ok, I touched the motors on the bottom side to feel the vibrations and they were zero. Also the propellers spin great. My Naza flys good at 130 and this should be enough. Only at 120% with Graupners and <100% with Dji propellers...

GPS ATTI 120/120/120/120 90/90 with Graupner 10'' (afaik they need more gain than the Dji props)

Here is the video at 120% with absolute zero wind: http://www.youtube.com/watch?v=2BjBXb6QsEc at <130% and 140% and heigher its getting better

videos from my lockover? They are both on the first page of this thread will try 130 for the next flight today

Thanks for the reply. Yesterday I tried 120/120/120/120 with my Graupner 10'' and heavy F450 and it was pretty unstable and shaky. 130/130/130/130 works ok. You think 130 is ok or should I go 125? Do dont want to have the lockover again, because next time I will complete break it I think.

what gains are you using? can this also has something to do with the battery? I think it always happend with my second lipo. Maybe I have to check this.

Some days ago I have had my second control loss based on the FFF problem I think. I'm using Graupner 10'' props and 200/200/160/160 gains. Now I have read the problem also comes with high gains. I have lowered them to 130/130/130/130 and it flys ok, but maybe more would be better. Is there a...

Hello, I have had my Dji GPS mounted directly next to the GoPro on the left arm and didnt have problems. But now I moved it to the back and dont have problems either. Do you have the wifi addon with the GoPro?

This are the first edited videos of my Dji Naza F450 with a GoPro 2 hardmounted. Hope you like it :-) Will hopefully get my Naza GPS this week and get more action.

Thank you, will double check the ESC and try again. The strange thing was, it didnt follow commands. I strafed right and down and it flew up and left...

Esc connectors are good pluged in. I just checked and one prop was not super tight but tight. Didnt used screw glue at this flight to secure the prop. Can the ATTI gains 200/200/150/150 be a problem?

Today I was flying early in the morning. The first battery pack was great and smooth but after the first half of the second battery my Naza went mad. I just started if and it strafed extremly to the left and hit a try. I tried to go right but it didnt follow my commands and just strafed left...

Yes I used 10'' Dji props for 2 month and had +30 flights without problems. But now I changed to Graupner and the videos are wobble free and I just feel secure.