Search results

I have sold one of my heavy lift copter frames where these were installed, and have had these motors and 60 amp ESC's sitting around collecting dust for a couple months now. These units have around 25 flights on them. I would usually fly around 10 - 12 minutes a flight. These are in excellent...

I have for sale a heavy lift hexacopter. This is a custom design I produced in 3D CAD. This is a prototype I had designed for production but am now working on REV 2 of this craft so I will not be using this copter any longer. This is a one of a kind copter. There is nothing else like it. And...

I am selling Quadframe's Smooth Gimbal controller. This is a controller for servo driven gimbals. Its the best controller I have found yet for servo driven gimbals. I'll post of pics tonight. Its used but in perfect working condition. Sells for 280 new I'll knock 100 bucks off. So 180 and its...

I am in the midst of building a heavy lift copter for high end aerial video using high capacity (heavy lipos). I have already selected my motors and ESC's. I have run my calcs on how much thrust I will need @ 50% throttle to be in a hover. Now that I have this value its time to select Lipos cell...

I am selling my hoverflygimbal controller. I crashed my bird so I need to use the cash to rebuild...This controller works perfect and is in 100% great shape. It will come with nylon screws, spacers, and nuts for mounting. http://www.shop.hoverflytech.com/HoverflyGIMBAL-HF-GIMBAL-00001.htm...

I am in the process of bringing a new 2 axis camera gimbal to market. I have been using the Hoverflygimbal on my multiple prototype revisions and its worked very well. But, recently I have an issue I am stumped on. I already submitted this problem off the HF support to get their imput but I...

So I am upgrading my F550 hex over to a Dialfonzo Hex. This guy has some really amazing designs! I cannot wait. The purpose of this Hex will be high end aerial video lifting a Sony Nex-5N on my prototype self made gimbal (which I will be mass producing and putting up for sale summer 2013)...

Can some one who owns this bird be kind enough to tell me the OD of the carbon tubes used in the "H-shaped" landing gear skid set? Also the center to center separation distance of the two longitudinally running skid tubes (front to aft...)...

Can someone tell me the ID of the two mounting grommets on the AV130 gimbal? Also what seperation distance there is between hole center to hole center (how far apart the two holes are?)...

Hello all. I am in the process of designing a gizmo to work along with the X650 line of multirotors. Going on sale sometime spring 2013. Currently I have it designed to fit the DJI F550 but want to adapt it to work with the X650 also. My problem is I dont own a X650! Anyways looking for some...

I fabricated this landing gear and camera mount for my DJI F550 hex. I have around 50 + flights on this setup and it has performed flawlessly everytime. Its light and very strong. I constructed it out of carbon fiber and aluminum parts. The pictures really tell the story. The camera is suspended...

I am building my own camera gimbal. I have a thread about it on this same forum location. Anyways previously I thought I would simply copy what Askman gimbal uses, which are two "Turnigy" BLS950 servos W/O external pots. After some research it looks as though there are other better performing...

So I decided to design and build my own two axis gimbal. This way I can tailor it to exactly what I want, save some money, and have some fun doing it. I start getting anxious if I haven't built something for a while so here we go again! Anyways, I took some of my design cues from the ever...

So I just received in from UAVproducts my GPS antenna for naza! I am in the process of setting it all up and have run into a bit of a road block. I am having a bear of a time finding a way to control all the functionality of the Naza/GPS through this lower grade controller (DX7). I am really...

So I have a F550, naza, avroto's, and soon a GPS upgrade for the naza. I plan on eventually getting a proper gimbal such as the AV130. But, right now I simply cannot swing the investment. I am looking for somthing to "tide me over". Is there any camera gimbals out there around $300 or so that...

I just outfitted my F550 with Avroto's all around. I am using Graupner 10x5 props right now since the motors are mounted in stock locations... Can anyone with this Avroto setup tell me what gains you ended up at?

I am upgrading my DJI F550 over to avroto 2814's all around. The prop adapter they come with has a 6mm OD. My Graupner props have a 8mm ID. I have looked all over the place and cannot find anyone that has 6mm to 8mm spacer in stock! Anyone know of a good store?

I own a F550 with Naza flight controller and all stock ARF equipment. My TX is a DX7 and AR7000 RX. I am an avid heli guy but new to mutli's. So far on my hex I have around 20 flights and they have all been perfect. Once I got the gains all set it has flown like a dream. Until yesterday...

Hi everyone my name is Neill and I am new to these forums. This is my first post actually! I am a long time RC'er, long time heli guy, and mechanical engineer by trade. I recently purchased a DJI F550 for the specific purpose of aerial video for use with a small company I own with a couple...