Search results

i'm using the Taranis and X8R reciver. It wokrs perfect. Just bind it for 16channels, and plug in your sbus. Name the channels 1-8 (i use 1-7) as the superx manual tells. I run the copter without propps outside to se if i get all flightmodes and safemode to work, just check in the blackbox...

Hey! I will keep fighting with the numbers:) Thank's for the help with the language, It goes a little fast sometimes when i write. I just translate the Swedish sentence in to English. But the sentence structure is not the same so some words would drop off and some new would drop in. This is a...

Just got my Turnigy Plush Esc! Wow what a different in the machine! It runs much smoother, just as this hexa should do. It feels much more safer and the engines sounds much better. The nervous bling sound is gone and i am all satisfied. Here is the logfile...

I bought Turnigy plush Esc. Hope they work out well. Against the uneven motor outputs it must be the propps. This time i'm using rc-timer 13x5.5" props with t-motor mounts. I got all motors perfect leveld but still som uneven outputs. Can this uneven outputs be some sort of esc problem. One...

Here is todays flight: http://log.xaircraft.com/report.htm#2014_02_08_070727.500_54.1.02.18 Look at 62 sec, one motors drop out (or more) and come back. This things happening sometimes and usualy early in the flights. This thing i direct pass ower to the esc. I got different "ringing" in my...

I did mean 13x6.5# propps. I don't know what i was writing haha. Here are a fast fly with t-motor style 13x5.5" props. The motoroutputs is a little lagrer. And instead of around 20-25 amp current draw with 6.5 props this 5.5 is more likley around 30 amps on hover. here is the log with the...

I would switch my 6,5 propps to 5.5 instead today. The rc timer 6,5 is not good in pitch. when i spin the blade it got different height on the tips of the propeller. Around 5-10mm. Thats not a good propp. This propellers are mounted with a regular propeller hub. The Multistar engines have not...

here comes the xaircraft log from the latest flying. This is with rc timer 13" 6,5 the got the motors uneven in cw and ccw. I will try to go back to my 13" 5,5 t-motor copys, they are all working great. But i get a little more flight time with the rc timers 6.5. Very nice that you want to look...

Good to know! i hard tested the afros yeasterday after aligned the engines a little bit better. They seam to work pretty ok right now. The ringing sound is more like it's "over gained" like a nervous sound. It proabably to lightwheigt witout the camera. It flies 8min 30 sec on one 5000mah...

Hello! I got a tarot fy690, a fresh build that i am tuning right know. I can start with my spec: multistar 3508 14pole 700kv engines 13x6,5 propellers Afro esc 30amp with a beta firmware for pancake motors (2013-10-29) SimonK. 3s battery superx controller at 1,2 on all gains but height is 1,0...

You have to align the motors. You got 3 fighting against some motors. Been there, done that. Mine drifted alot before. Know It Works fine.

My thought about all channels is: 7 channel for the Superx if you use gain control (9channel left) 1 for videoswitch 1 for remoteswitch for light 1 for servo with release function for dropping things on buddys gardens :) 1 for gimbal tilt 1 for retracts 1 for Osd screen display (Hornet osd)...

When the Taranis comes there will be a new world of learning. But it seams like a good radio with good range. Do you use the Sbus on the reciver for your SuperX? I will try to figure that out and use the spare channels for fun stuff.

Hello! It's the radio inputs, when you see pitch i am telling it to go forward. Motors were all very underpowerd for my set of gear (this was a dji f550 with 2700grams) and it's kind of windy and cold this day. Unexpected motorlevels are something that comes with windy and overloaded rig. Now i...

I have done this to! I had setup safemode switch as failsafe, but i had also setup fmd switch to failsafe by accident. Didn't know that before i run out of range. I tested the failsafe on the ground by turning of transmitter. Got all the right led flashing, done let's fly. But the reality in...

Av8chuck: www.xaircraft.com and go to blackbox. There you can upload the "log" file from your superx when plug it in. After that you got a button in upper right corner that make your logs to a graph. Back to my problem. But it is not a problem anymore. It's solved. I measure every engine and the...

I Will try to make some test tomorrow. When you say "IO" you mean "inputs/outputs"? I'm from Sweden and got some problems with abbreviations. But i will Sort It out by time :)

Anything new on this motor issue? I got the same on my hexa with superx. Al clockwise engines run 20% higer in power. But my heli seams to work fine. I have tried t-motors v2 props but no difference. I got a f550 clone. Want this issue to be solved.. /Tommy