Search results

Take your props off, unplug the esc servo leads going to your wkm, unplug the throttle servo lead from wkm to receiver, plug the new esc's servo lead directly into the throttle channel of your receiver (make sure signal wire is right way up). With radio off move throttle to top position, plug...

what about the other five esc's that are calibrated the other way?

you can't fix bonehead... or you just redo it until you get it right. Pretty soon you'll get so proficient at it, you'll use it has a parlor trick to amuse your friends at cocktail party's.

Take your props off, unplug the esc servo leads going to your wkm, unplug the throttle servo lead from wkm to receiver, plug the new esc's servo lead directly into the throttle channel of your receiver (make sure signal wire is right way up). With radio off move throttle to top position, plug...

*This is from a couple weeks ago. Awsome, the dude must have made a buttload to be there and capture natures raw beauty... Hmmm, dudes not very high and he seems to be real close to base camp, maybe this isn't has hard as they say... Spot the pilot in this picture and you will also have...

can't show what we shot but I can show where (and technically the camera is on a crane) bonneville salt flats, utah saturday april 12th 2014

They're sealed bearing, meaning they keep krap out and keep lube in. I bought a bottle when I got into this stuff a couple years ago and I've used a total of like 6 drops and most of that got spun all over the arms. Replace the bearing if it's making noise and save yourself the mess.

It's the small board that's mounted by the camera.

obviously he wants something that floats for starters...

This board's from U, dude gets me my stuff 2 days tops from the time I order with standard ship, sometimes literally the next day if I order early enough. I'm in no hurry, hopefully I only cooked the sensor and the 3rd axis board (which I was considering ditching anyway).

I have another complete board on order, won't be here till end of the week. Had everything working alright save for a little tuning, then I decided to try the factory cable for the third axis board (I made my own shorter cable that worked), got it all plugged in, turned on the power and I swear...

Does the Alexmos board and the martinez board use the same sensor? I got a whiff of magic smoke out of a 3 axis alexm board the other day and now I'm getting 12c sensor not connected errors. I've got a couple of sensor's from some martinez boards and am wondering if I could use one of them to...

it's coming just not yet.

but your transmission won't be.

this is like gospel, well said dude! Accupro, you'll need a live out on any camera you choose to use. Something like the rx100 on a simple servo based gimbal would probably do the job. I've even seen servos used to control the little zoom button and shutter but that gizmo moto referred to is...

Nice!!! Couple questions, are the cf tubes included and what length? If someone wanted to try making an X8, can landing gear piece be substituted for another motor mount piece? Conrat's on the store dude!

http://cheesycam.com/panasonic-gh4k-camera-announcement/