Search results

With your A2, what's your vertical gain setting? Too low and it may drop and climb through maneuvering... OT, good looking bird! :)

On the A2, version 2.3. I've built and delivered appx 30 machines using this without issues during test flights. WKM, version 5.26. This is also what I use on my personal machine, a 900 sized bird designed to carry a 12lb payload. It has a WKM with 900mhz datalink on it as I haven't had a...

All the HL rigs I build for customers use the WKM A2.

Are you certain you have the appropriate items plugged into can-bus 1 and can-bus 2? I had trouble initially with the GPS puck plugged into the wrong can-bus...

My only loyalty is to my customers. I'm selling them a complete turnkey unit, and I use only components that I'm comfortable selling to them. After all, if their unit crashes for whatever reason, they look to me not DJI, or OS, or Exceed, or any other companies components that I use. I'm the...

I fly 4s, using a 5000 mah pack, I get appx 12 minutes carrying the H3-3D, video downlink, and 2.4 Datalink on a Hexacopter with the e300 system. I tested it with 3s, and it flew, but I could tell it didn't have the power, and the flight times were horrible.. I have a buddy with the flamewheel...

I'm now on a third A2 in 3 weeks on 3 different builds for three different customers, all working as advertised. All 3 units were purchased at different times over the last few months (had a 2 month hiatus while we moved our shop to a new facility). 2 were on 900mm Octocopters, the latest on a...

Your throttle isn't backwards in the radio setup, is it? If looking at the slider in the assistant program, low throttle should have the slider all the way to the left.

I bought a used car once, POS..... Ford wouldn't replace it either...

I've installed the e300 system onto my own design Hexacopter, did not worry about balancing the props. With 3ea 4s 2200 mah packs, my weight is around 2700 gr, flight time appx 15 minutes. Here's some onboard video straight from the camera. http://youtu.be/6XyGl9K8ZO4 I think the props are...

I don't think it's the weight necessarily that causes issues, it's overloading the capabilities of the airframe. For instance, here's our 900mm Hexacopter with appx 4 lbs of payload, for a total AUW of appx 15 Lbs, flying with a Naza w/GPS. Seems to work just fine...

Definitely upgrade to 5.21a.

Successfully flew an octo, using traditional Rx, "I" formation, on 5.12a, on Saturday. Tested the RTH switch and IOC POI. A few gain adjustments and all worked perfectly for a flight of appx 15 minutes. I previously crashed this Octo when I allowed the batteries to run down a bit, setting...

Pics of one of our latest Octo's with mount from Helicamsolutions.com. She weighs 14.8 Lbs with 2 ea 4s 5000 mah batteries and can carry up to an 8 lb camera. Flight time with just the 2 batteries is 10 minutes+, it is possible to add 2 or 4 more batteries for extended flight times.

Dang you guys. I thought I had an original idea with using a washer. :( I have used a large brass washer, steel washer, and copper rings made from soild copper wire, soldering 10 AWG wire to them. So far I haven't seen any issues with EMI or such.

YES!! We are using the OS 30 Brushless motors on our line of Multi's. So far, reliability has been a non issue. We're swinging 13X6.5 props with 4s packs.

Lazy ESC's or a motor with a bearing problem can certainly cause this, or other issues such as trouble holding position in one aspect such as forward or back. As a test, try swapping it with a different leg, say one that spins in the opposite direction to see if it has any effect. Then try...

Website is back up, but look for some changes soon...:) http://bergenrc.com/

Thanks Bart. Yes our site is Bergenrc.com, however it is down ATM for some uknown reason that will get resolved in the AM. :/

Customer's with actual truthful issues I can deal with, it's the trolls/haters/potstirrers that make it difficult. It's especially sad when some mods are the ones trolling!!