Search results

In that case you are already at the latest version and you don't need to update.

Chris, you can just do what bensid said and go outside and start the motors up per his procedure. My concern is that, if you don't even know what flight mode you are in (e.g. GPS, Attitude, Failsafe, or Manual), you'll get it in the air and then not be able to effectively control it and...

rwilabee, you are correct that it was the first wave of V2 antennas that had the problem. But from what I have seen, you can't really tell them apart. They both simply say "V2". Maybe by the firmware version?

What version does it say is currently installed? 3.14?

100% agree!!! Exciting times!

So Chris, the first thing you need to do is check over all the installation and make sure things are connected properly and everything is talking to eachother correctly. To do that, find a USB to micro-USB cable, and plug it into the LED on your MR. The LED is a little square inch piece with...

Bummer they didn't fix that GPS issue :(

Sorry if we're talking past eachother... I have the V1 IMU with retracts, Zenmuse, VTx, iOSD, datalink, etc., and it flies perfect. In my opinion, it's like any other product evolution. New versions improve upon the old hoping to address any issues or concern or shortcoming of the old. And...

Too funny! What part are you having trouble with? Have you hooked the Naza up to a PC to double check all connection are working as well as the inputs from your transmitter?

Sorry, I would have to disagree. I have retracts and a Zenmuse. In fact, for the first year that the Zenmuse and retracts were sold, only the V1 IMU was available.

http://www.dji.com/download/wookong-m-waypoint-downloads/

Tom, it's good stuff, and you even did the forward+pan in your clip from 1:40-1:60... I thought that was gorgeous. Another thing I love, and you almost it, is the flying by close items. You almost did it at 0:16. It would have been sweeeeet to complete the flyby of the mast, and if possible...

That would be one way. The two times I wanted to do it, it was because I was shooting some indoor stuff, and transitioning from inside to outside, but then requiring autoexposure (fixed time exposure, but auto aperture). Then again, if there wasn't anything of value in there, then it might not...

Yes, I do believe the Alexmos board would work, tho I can't say for sure since I don't own either. i sent a message to my friend that has the RC Timer gimbal, and I'll let you know which controller he has. however, I do agree that an all-in-one unit with controller might be easier to setup.

They didn't remove all evidence of it. It's still there and lists all the changes 5.24 had. Page 2 of the release notes. It's just that they did not come out with a new Software Assistant version, so 5.26 still uses 2.02. So v2.02 wants to upgrade the FC to 5.26, and there is no specific...

Nice job Tom! Would have been cool to have a shot where you started inside the building with the huge doors, then back out of it... I know, wacko idea, but it's been something I've been wanting to do but haven't found place to use that idea yet. ;)

You would have to have either of the DJI groundstation transmitter/receiver pairs: the 900 MHz, or the 2.4 GHz. I also see there is a new iPad product that uses this feature, but I'm not familiar with it.

Sorry for delay in responding... been a busy day. I do agree it is a bit heavy for a stock F550, but you might be alright. Are you using stock motors/ESCs? I have some friends that have a MKTR professional gimbal which is listed as 1.1kg with landing gear, and they use stock ESCs/motor with...

Rainman, what plingboot and I are talking about is mixing two switches into the one U signal. If you see the slider for the U channel, it has gaps in between Manual and Attitude and GPS, and these regions are the Failsafe/RTH region. Here's the video I was looking for. Around 3:30 is where he...

I guess maybe I viewed it that way because I don't know anybody personally that does 3-axis with single operator. For me personally it boils down to not enough controls that one person's hands can work, and the brain power do to do. I know that I could definitely not handle panning and tilting...