Search results

Which case is that? Sent from my SPH-L720 using Tapatalk 2

I have been using the AeroSim flight simulator. It has pretty realistic flying characteristics and lots of multirotors to choose from. On the down side the graphics are horrible.

Well I managed to make the Zenmuse fit after some messing around with the orientation of the Zenmuse four brackets. It doesn't look like it is made to fit that way but it looks like it will work fine. The little Zenmuse controller won't fit inside the mount on top of the Zenmuse but I have a...

After messing around with the GH3 Zenmuse parts I think I have found a way to make the bracket fit. I will report back with photos if I am successful.

Thanks for the info Andy, another $62.00 down the drain. I am hoping that the Droidworx staff monitors this forum, I would love to get this thing up in the air sometime soon.

I have noticed that as well, most of the experienced pilots like to keep the information to themselves with the exception of a select few like "Droider", "ChrisViperM", and "Bartman." They have provided me with lots of great feedback. As far as the GH3 goes, I love the camera and the video...

Thanks for the update, I considered getting the A2, I will stay with the Wookong.

I bought a Zenmuse adapter plate to use with my new Zenmuse Z15 GH3 gimbal and for the life of me I cannot figure out how to mount the Zenmuse to the plate. I have looked online at the Droidworx site and there is not any instructions. It appears that it too small to attach properly and that...

Good to hear that the motor wasn't actually bad. I bought a couple of strips of the Kyosho Zeal adhesive ( http://www.amazon.com/Kyosho-Z8006-Vibration-Absorption-Sheet/dp/B002U2GS2K ) and plan on using it under my main controller, IMU, Receiver and IOSD. It is probably overkill but I am...

I noticed the issue with the screws as well.

I am using liquid tape over my solder joints and for lights I bought a navigation kit from RC Lights. They can swap out the stock LEDs to any color that you want. http://www.rc-lights.com/products/RCL5324.html

Good idea, I will head over to FPVlab and see if they can help. Sent from my SPH-L720 using Tapatalk 2

Thanks, I was wondering how to find those connectors. Sent from my SPH-L720 using Tapatalk 2

I am looking for a pre-made cable that I can run my FPV camera and my Zenmuse Z15. These are the cables that came with my IOSD II and they do not look straight forward at all. Does anyone know who sells the type of cable that i am looking for or other IOSD owners what have you done to...

I guess my question should have been, will there be heat issues if I use Velcro/Dual Lock type fasteners on my ESCs? Sent from my SPH-L720 using Tapatalk 2

Quinton, Your PCB looks very clean with the ESCs attached to the board. Since I am using the Gryphon PCB I have to be creative with the location of the ESCs. I was thinking about using Velcro to secure them to the bottom of the top-plate. I am wondering if Velcro is an acceptable...

I have the exact same question as you. I stay away from using blue thread lock on any nylon stand offs or nuts but I use it on almost all metal nuts and bolts. I don't use red threadlock at all, I have heard too many horror stories about striping bolts trying to get the stuff off and the only...

My Zenmuse GH3 just shipped today, it will arrive on Wed. I am pretty excited.

I am building my skyJib right now as well and I must admit that the rail had me stumped for a bit. Your gear rail looks correct. Btw I am soldering my pcb and this soldering iron works awesome for me. http://www.hakko.com/english/products/hakko_fx951_set.html#productNav Sent from my SPH-L720...

I was sure that I would have at least a few responses to this question.