Search results

What I'm seeing is not good, as temperatures start to rise around the country the Phantom 4's lipos are going to be in the danger zone in anything above 90 degrees. Flew mine indoors at 72 deg and lipo temps were a lot less, but didn't do a full discharge. When I asked on another forum. They...

Never used one, should connect through the trainer port.

It shows on the same page as milliamp hours and cell volts.

Take a look at your lipo temp at the end of your flights, and please let me know what kind of temps your seeing? I am seeing 55-62 deg C at between 15 and 25% capacity remaining in an ambient temp of 83 deg F. Seems really high.

Range has been amazing for me, considering it's at least double the range of the frsky x8r w/HD video no less in the high RF enviroment I fly. Handles wind like nobody's business, as you know, and can see in the video I posted. Definitely hooked,... line and sinker.:D Still, the SuperX holds...

Frsky Taranis.

Try lowering the throw on roll and pitch channels to -75 to +75. There's an issue with the 1.11 versions of the software. Just can't remember. Been wrapped up playing with a Phantom 4.:)

I gotta say, the 4 has absolutely blown me away. This thing is so portable and easy, flies like nobody's business in gusty winds. First DJI product I've flown since starting this endeavor 2 years ago. They sell this thing as everyone can fly a Phantom. That's a joke! For me, It was a breeze...

What does the gimbal do with only power connected?

My business partner dropped off a Phantom 4 and it is an amazing quad. But when it comes down to the way it feels and flies, having never flown a Phantom, the SuperX is still my favorite for smoothness. But the F-ing video from the 4 is mind boggling. This was the first daylight flight. :) Wind...

Absolutely wrong! Never had an issue in now over two years and 100's of hours flight time. Letting your lipos get to that discharge level is dangerous and unsafe. Proper flight management/planning needed. You should always have a minimum of 25% of pack capacity remaining upon landing.

You need to remove the red wire as it 's for powering a separate receiver for camera op/handheld use. If you bound the x8r right, 1-8 pwm pins on the xbr become 9-16 when using 1-8 on s-bus. What's with the failsafe connection on pwm ch 7? Failsafe should only be on s-bus??

Aspherical lenses are lenses with complex curved surfaces, such as where the radius of curvature changes according to distance from the optical axis. Spherical lenses are subject to aberration and therefore cannot concentrate all the light into one point...

An aspeherical lens with a 94° field of view (FOV) reduces distortion by 36% and chromatic aberration by 56% when compared to a Phantom 3. A reduced hyperfocal length of one meter allows you to get closer to objects while keeping them in pin-sharp focus.

http://www.getfpv.com/batteries.html?battery_capacity_range=331&cat=76 http://www.thunderpowerrc.com/Products/AIR-BATTERIES

The Tiny2 wants 4 channels, but removing roll eliminates one. 1-8 S-bus Naza, 9-11 PWM directly to the x8r. Bind the receiver in mode 4.

Friend of mine pre-ordered one and he wants me to set it up and test fly it for him. :D Looking forward to my first phantom experience.

If so, they would be even more expensive then KDE or Avroto.

You will want to bind the X8R in D-16 mode and run Ch 1-8 Naza via S-bus. The Tiny2 PWM 9-16.

Zhiyun Z1 Tiny 2 as far as a gimbal.:)