Search results

Hi Rory!! I tried it once, on your old V2 now my X8, seemed pretty cool. I engaged it while in forward flight and then banked to the left, it for sure combined roll and yaw, so yes it works. However I was moving slowly laterally not in IOC or "bank turn" and then switched to "banked turn" it...

I just finished a Tarot 690 I using a Naza V2 and the DJI E600 power system, I must say I'm thrilled with it's performance so far. I've got the 900mhz down link PC ground station (works flawless) Immersion 600mw tx IOSD mini (fpv) tarot 2 axis GoPro 3/4 gimbal (pretty damn good for a $100) two...

So far I wet sanded the dji logo and used a black sharpie, looks better than orange and white. GPS signal has not changed a bit. I was now going to give it a light coat of flat black spray paint and test signal, Does anyone see this as being a problem? Thanks in advance.

Just got this email from DJI <tbody> <tbody> Dear DJI A2 Dealers&Customers, In order to secure the self-tightening propellers, A2 2.4 firmware will initially allow the motors start off at a higher speed, and then slow down back to idle speed at the beginning. However, some customers feedback...

Ok granted this is my first Naza V2 setup, I've done A2's and WKM's I've adjusted my endpoints for my 3 pos switch for GPS-ATTI-ATTI all hit the blue marks fine. I then turn off the Futaba T10J and nothing happens. I'm not that familiar with the T10J I was reading in the manual about "failsafe"...

I used the GoPro app, and it did some weird stuff, check out the front right motors, I promise, they don't wobble in real life:shame:

Anyone,,,

I'm not too worried as the last version was good. All this has is added features. The airport restrictions can be turned off with the click of a box. The gps has for sure improved as I really noticed that. I'm brand new to the A2 so the last firmware and initial flights I paid close attention to...

They perform different on different crafts. Do you really think that someone is just gonna give you an A2 to try !

Not sure but I thought of that after the fact of course. I for sure exported my config after this update. All working good thus far, I did notice GPS lock was more that twice as fast and it held hover rock solid. The banking turning feature is cool However you loose one of the other IOC controls...

I was told only the MK2 worked with it.. I guess they were wrong.. Hey Rory, It's Jeff from Revolution. The Checks in the mail to you for that stuff, did you get my address?

No, You need the IOSD MKII

Im baffled here, I understand how to assign it, however everytime I choose "ST-THR" ON: UP 50%. When I try it the timer starts only when i move my pitch and elevator stick, but once centered the timer stops. The aircraft flies correctly and all controls are good in the A2 assistant. How do I...

I just did the upgrade, and got a scare, as you need to completely re-config EVERYTHING! Lost the bind to my TX got that back, with full calibration and re-assign all switch functions, re-enter my IMU and GPS placement, select my mixer type, cal batt warning, basically a start over. the results...

Thanks, I think just a bit of minor tuning and it should be awesome. I was flying with the stock gain setup in the A2, It seemed to fly fine, not sure if it can be better as I've never flown an SJX8

All went well, perhaps a bit too little weight onboard as it wanted to fly as soon as I armed the motors! so I either need to drop the idle below the recommended or add more weight. The GoPro is hard mounted and will be for fpv only.. Sorry for the bad ground camera work, it was a friend who's...

Wow these KDE motors sound amazing, and sure move some air. We bagged it with a ton of weight to check control inputs.. all good so far..

Hi there, I was wondering about the "QR" clip on the front or back where it won't have booms, does it need to have the "QR" clip? I'm also finishing a SJX4 XXL with 540mm booms.. KDE power and 18x6.1 T-props flying with an A2 as well

Sorry no longer for sale

I get the premise. But does one use regular hot glue as in glue gun? I've seen many factory electronics with hot glued bits so I assume it's ok.. Thoughts ? Kloner?? SJX8 Is now running:-)