Search results

I have the same gimbal with the V1 board. I powered mine up for the first time yesterday and it is exactly the same as yours with the noise and high frequency vibe. It does it when you tilt but it is actually the ROLL motor, if you unplug ROLL motor the tilt does not vibe (perhaps you could...

I don't think you can tell how well balanced it is if you ignore the first three seconds as he says. From the remainder the tilt looks like it might be ok.

Wow, that's a long wait. I've biten the bullet and ordered one.

Have you tested yet?

I notice the later versions have a small connector on the board so you don't have to solder the outputs, maybe these later versions are NTSC compatible. http://www.fast-lad.co.uk/store/devices_super_light_mini_hdmi_converter_module_rdc3015s-p-27568.html

GotHeliRC sells them and they say they have tested on their cams and it works. I guess they would not have PAL cams.

There's always this one. Not quite so elegant but at least it is switchable from NTSC to PAL. http://www.thanksbuyer.com/mini-hdmi-to-av-converter-card-set-w-hdmi-cable-and-av-cable-pal-ntsc-for-fpv-sony-nex-series-camera-26979

Correct. I would just get another type of HDMI converter.

Has anyone used one of these units yet. I want to know if they work ok before I buy.

The 5N has been superceded by the 5R and the 5R very recently by the 5T. 5R's are still available new at about £360 (Body only).

Yes, mine has 50i on the sticker. A little extra battery drain is fine, I can live with that, just didn't want to hear it reduces the time by half.

I notice this unit does not have a dedicated power supply it takes it from the cameras battery. I would like to know if this shortens the battery time by much. Anyone know the answer.

Hello again, we're doubling up the posts but never mind it'll help make more people aware of a possible problem. 60i is NTSC cameras and the European (PAL) cameras are 50i. The NEX cameras are fixed.

I get the feeling that all these units are PAL which is fine for me being in Europe.

Anyone tested one of these yet? http://www.rcshutter.com/index.php?route=product/product&product_id=90

Is this the unit you are refering to? http://www.fast-lad.co.uk/store/product_info.php?products_id=26978

A Gmail account is very odd. It is suprising how hard it is to get 12x5 and 12x6 from the better quality prop manufacturers.

How the hell did I miss that, thanks PeteDee, opology to T-Motor.

Do T-Motor make 12x5 and 12x6 carbon props? Or does anyone have an email address for them, I cannot see any contact details on their website - I hate it when companies offer NO direct support.

They get very hot do they, maybe I should make up some heat sinks. You don't have to plug the controller into your r/x, I shall not as I don't want remote control, plus the less equipment plugged into my r/x the better. I'll just shove r/x (4v to 13v) voltage (regulator from power bus or...