Search results

Thanks a lot for the compliment Mr Anaka :) I will pass the AVROTO to 5S LiPo now. next motor wil b AXI 282014 and Mk 3638 Then AHM 36-6 Before buying other motors I have to pass these one on my test bench :) (and the 160€ of a Plettenberg isn't a piece of cake...)

Hi, I have changed my test protocol: first I was doing steps of 2 seconds from 30 to 250 gaz but now I'm doing 5 seconds steps from 30 to 200. a 5 sec step is VERY stressfull for the motors after 200 gaz. For example we rech more than 20 amps on the avroto at 200 gaz. 5 more steps mean 25...

Hi :) it's been a very long time but those who follow me on tweeter have seen that I was working on the AVROTO M2814-11S V3 test on the benchmark :) The results have been published a few minutes ago on my website It has been 18 props that have been tested, 4 days of hard work doing...

Hi, Kimberley has followed our enhancements on AV200 and now all the AV200 are delivered with a 3 turn potentiometer and a 72 tooth wheel. With the Skyline, you don't need anymore any potentiometer :) the skyline handle evrything ;)

Video tutorial skyline ! Hi , I have made a tutorial video on how to mount the Skyline on an AV200. Today (if weather is fine...) I will make some tests in flight with it. I hope this time my video won't be copied and credits deleted by some other webshop...

skyline's weight : 9.9gr cables 's weight: 16.2gr total weight: 26.1gr these measure has been made by me, it's not manufacturer's data.

Good morning, I have received the skyline test card today. here are the first picture of it: The testing kit is composed with the following parts: - The skyline itself - a threaded axe for tilt mouning - cables - USB interface for programmming - cable attach. I don't know if...

Hi, here are some fresh informations: the is a little delay in dispatching of the test skyline: the cable provider is a bit late in his delivery but the test Skyline should be posted this week. The schedule is the same: - delivery of the test skyline ( 4 to 5 days) - 1 week to test it -...

Hi, the skyline test cards will be sent next tuesday to resellers for testing purpose :) After a week of test and reports, the reports will be analysed by the Photohigher team to look for eventual problems. If no problems are detected, the skyline will be dispatched :) best regards, Cédric

I confirm this is an update of the website. I talked with Sue two days ago about this but it seems that there is a problem because the update shouldn't have taken so long...

Thank you Boris for the video :) here's a second one with lots of infos inside -The skyline is already equiped with connector for a Rx. This will allow a direct control of the 3 axis by a dedicated radio translmiter (for a video technician for example) -The HERO gimbals will be...

So your the only respectful customer guy ? well, DON'T BUY THEIR PRODUCTS if you find it too costy and that's it :) What can we say ? You think Photohighers's products and devellopment are sold too high, That's your point ofview (and the one of several customers) but I'm not doing the market, I...

hi, stop thinking that a product is just the sum of his components first :) When you build something for yourself, no matter the time you are passing on it: it doesn't cost you anything. When you have a company and when you pay someone to devellop a product this has a cost,a mould for a piece is...

These gimbals are very new and we only have few info about it. we don't spoke about landing gear for now. I can't say if it's programmed or not, sorry :/

Yes it's designed to stabilise also the new hero gimbals :)

Yes it is :) I won't fit directly on it because it has been designed for the AV 200 but the stab will work on all gimbals.

Hi, As the information is now official we can speak about the futur enhancement on AV 130/ AV200 motor. Kimberley as worked on new gimbals (HERO) but he has also thought to the AV 130 and AV200. There will be an upgrade kit composed with this new motorization allowing a greater resolution...

Hi, As you have seen on the NAB show, photohigher will release very soon a new stabilisation board. It's tiny and weatherproff (IP65) It's 100% build and manufactured in new zealand allowing a very good following of the product. Photohigher will send at the end of the week some...

Good morning, it's been a long time I didn't update some infos here but I have very good news :) Some time ago I have been interested by cloverleaf and pinwheel antenna for video transmission cf: As the results were not a revolution, I have asked to a specialized company to make some...

Hi, I have started an excell document to compare carbon fiber sheet prices. It's not complete and the document is open to evryone that wants to participate: https://docs.google.com/spreadsheet/ccc?key=0Ah2w1GCM2o3zdHhuN0ZURkFZclAxWlZIaC01VFUyNkE I can't add an excell files here but if...