Search results

Thanks a lot for the sugestion, I think evrybody can modify the document but I will do it :)

Thanks you multihexa :)

And please hare it on the google doc used to :) thanks :)

Guys, please be patient :) Actually the end course can't be set up . so you can't define end course other than those already fixed :/

I'm not speaking about the tests I'm doing, I'm speaking about the test done by photohigher. I really don't think that Photohigher's staff is releasing products with such a default consciously. about the current drawing, I don't know how photohigher is doing their tests and what is their...

The inspection assembly can'tdetect this kind of problem because all the gimbl are tested plugged. The massive torque of the servo doesn't see the "hard point". You can only see it by rotating the gimbal by hand. I'm pretty sure that it won't be seen on videos because the servo's torque is much...

Hi, Photohigher has informed me that the roll servo wheel can present a small problem on the last AV200 delivered (since 10 days): during the laser cutting process, the plastic sheet has moved resulting in a non concentric center hole. This problem can lead to hard point on the roll course...

Well if your servo doesn't have a potentioeter, it's normal that it spin without stopping. The pan servo MUST have a pot. It's better to use an external pot because if it's inside, you won't have the possibility to make 360° unlimited.

Hi Benbigdude, I'm sorry but doing some assistance by forum isn't very handy. Don't you have any guy around you with some knowledge about setting up servos ? if you want to set up your pan system, try to set up the servo outside the gimbal. when it's ok, install it on your gimbal in order to...

Hi benBigDude, this problem isn't correlated to the skylie, it's a problem between your transiter and your receiver. You must set up your trim on the pan. and... that's it :) what you can do: remove the belt of the 360° switch on evrything. your pan will start spinning. trim your transmiter...

Hi, I have placed my 2 newsletters on my website for those who want to see it without registering in the mailing list ;) newsletter #1 newsletter #2

Aerodron is late in his informations, It's been monthS that Photohigher is delivering The AV130 and AV200 with 3 turns potentiometers. Aerodron have been very fast to take the idea of my enhancements kits for AV200 when I have started to sell it but he's not as fast to follow the products he's...

You should ask to Aerodron.ch if they change the stockk servo because all the Photohigher gimbal I receive are with SAVOX servo. I have never had some with hitech. NE VER :)

Hi Aemontoya, read the previous page, there's an update about the hitec servo. Stock AV130 are normaly delivered with Savox servo, not Hitech (until now) Savox servo are effectively modified: the Potentiometer is external. On stabilization you have the DJI stab wich is known to be well... a...

Stick or pot, it's the same. The stick have springs to come back to neutral point but it's still a potentiometer inside :) just be a little patient, Photohigher is working on the next firmware and it will probably have an option to work as on MK ;)

Didn't try this yet but if you do so, you won't have tilt control :/ About the feedback, I have seen a video footgae of one of my customer yesterday and the roll stabilization is just amazing.... I hope he will allow me to post his video.

Hi Jappie, You should really read the manual and watch the videos I have made... I show in my video that you can control the tilt thru the skyline. A futur firmware will allow you to control the tilt exactly like on the MK. (a potentiometer position correspond to a tilt position of the camera...

What are you talking about ? You have a skyline yes ? so there is NO MORE connexion between your gimbal servo and the flying card : NO CONNEXION AT ALL :) As explained in my videos, everything is now handled by the skyline: everything. on the servo you have 2 plug: one for the servo powering...

@multihexa : Can you give the exact reference of the servo please ? @heinz: Can't do anything from there, are you available this evening on skype ?

And what about the check in the hardware management configuration? do you see the USb cable ?