Search results

Here are a couple of yards we just finished. Give the customer a different view.

I hope to get out to fly today but with weather here on the prairies it tstorms and wind and not always in that order.

It was a combination of things, bind plug not all the way in, made some changes on the radio as far as the alt hold switch. then upgraded the firmware on the nasa and it works.

Well I'm up and flying again, thanks for your help kloner. And a big thankyou to my friend at rchelicanada.com for all his help, much appreciated Jeff!

does anyone have a quick link for binding a jr9503 and jr921 I seem to be missing a step

Thanks. I have a JR921 in my gaui, I switched all fpv gear over and it works fine. Other than a weight issue I'll have to wait until the wind dies down to do a real test.

I was hoping to switch the gear over to the AD-6HL but at this rate I not sure if I want to.

I do have a JR 9503 would it be beneficial to switch to that. I would just need a different receiver.

voltage is right up there. Failsafe is not set. not sure how to. I have moved sattelite and will try again.

I moved the antenna and this time when it went down it seems to be the radio because I still had perfect video. So I took off the glasses and tried flying with everything on and sure enough it came down just 50ft away, dropped straight down. Only one broken landing gear, thankfully.

I'm not sure It fell so fast by the time I got the glasses off it was down. I have wondered that too. When I fly without glasses all if fine.

So I received the 300mw and got it all set up.. Went up just now and had the same problem. I was up about 40' and 300' away and lost signal and it fell out of the sky. Went up again and got about 15-20 ft up and 100 ft away and same thing. Picture quality was perfect. Screen went fuzzy and...

Thanks, works great. Now I will wait for less winds so I can really try it out.

Camera is 12v. And yes you're right I need more length. Thanks

If I solder all this together will it work?

this is the rx in relation to the 1.3 trans

This is what system came with minus the goggles. I don't have gps on mine only alt hold, and I was flying manual at time of crashes. My soldering abilities are limited that is why I order most things plug and play if I can. In this case I could not get video on goggles with the small wire so...

If I move the transmitter so I can get motors to start, it flies about 12-15 ft up flips and comes straight down. When I remove all fpv hardware it flies great. So if I go with the 1.3 300mw I should be ok?

If I go with one of these transmitters, they are lighter but what about interference? What is the difference? Would I be better off going back to 5.8?

You're right the size is a problem, I'll contact readymade and see what they will do. I'll let you know and post it. thanks alot!!