Search results

here's some good advise for everyone with a cheaply made Naza usb port like mine. FILE DOWN YOUR USB PRONGS! just file those little teeth that are supposed to lock the usb cable into the port and you will prevent what happened to me and pulling out the guts along with the cable. I was very...

I am having the same issue with drifting right. It seems impossible for the FC to be off level in relation to the lower frame plate as there is only a thin piece of double stick tape holding it there. Are you telling me the 1/64" thick tape can throw this thing off if it isnt dead nuts? A...

He may get a few unsuspecting victims to fall in his web. But we all know you're the real Geoff. I would make sure to keep bumping this thread to the top of the forums. Sorry you gotta deal with this crap.

I was there with Libr22 when he tried various throttle positions. It just hovered in place. Maybe we didnt wait long enough for it to start coming down. My Naza smoothly comes down instantly when in failsafe. All I did was set the failsafe on the JR with the failsafe switch on. So why on...

well, I did have a loose prop nut when I first took off and a prop flew right off. but it actually gave me a chance to see that the hex can hold itself from going haywire on 5 motors! Always wanted to know this. I am flying avrotos on 3s with APC 12x3.8's and gains of 275/80. It was...

damn. its like watching a trex master take hold of a multi.

A friend and myself both tried our WKM hexas and could not get the failsafe in hover mode to descend at all. His failsafe was set to lower the throttle on a futaba, mine was set to fail safe to the switch mode on a JR.

that's funny, I saw the title of the post and knew exactly what it was! haha. now get off my lawn!

2d .dxf is fine for most parts. I can cut just about anything. I have a CNC plasma cutter as well, although not ideal for intricate parts. Your parts are on their way.

It's weird, I am positive these props come from the same source as Xaircrafts, but after crashing this thing hard and having only 1 prop break I have a new faith in the materials they are using. I tried breaking the remaining 3 props as they were scuffed and warped from the impact and I...

Beautiful aerials of SUP(stand up paddle boards) in Tahiti.

most of the better escs in that range will be $30-40. I think the only ones that are out of the ballpark are going to be AXI or Kontroniks.

I suppose you could flip them around. I just thought it looked cool this way. I think if you mounted the gopro under the battery tray, with the lower plate oriented front/back, you might get the legs out of view. I am also flying in 170deg mode which gets damn near everything. Thanks for...

There are too many options. I would say the one you have linked to or the maytechs are your best bet from reading what people have had success with. The DJI units seem to like the 400hz esc's such as the maytechs.

I just want to throw in there that I have the exact same drift. It wants to drift right more than anything else. I trimmed it out but not sure if this is the right way to solve it. Did I mention my NEW (2nd) USB/PMU had the internals rip out with the cord? Wonderful!

I think I made this suggestion a while back but how about a page link at the bottom of the active forums? this way we can just click the active forums and then go to the next set of most active right there.

Yeah me too. Even if the sound was the gopro shaking in its case, the sound starts out of no where and that is also when things went south. I am told that DJI may or may not warranty faulty motors. Can anyone say XAIRCRAFT? EX-AHER-KRAFT.

Got payment but address didnt come through. Send to: sales@IrisAerial.com

That was my first flight. It flew perfectly for about 3 minutes. Then when it gained altitude, of course, it just started acting weird. Not like a complete loss of signal but more like erratic behavior. The gopro has 4 foam pads in the back that keep it from rattling. I can say that 2 of...

Ken I am still anxiously awaiting your test results for the DJI WKM running on 5 motors on the Y6. Didnt you say you were gonna try this out? I dont know if you can take a prop off and see if it takes off or somehow disable a motor remotely to test this.