Search results

I had to recenter the arm piece on the roll servo. He drilled holes that were not allowing the assembly to be centered on the servo shaft. I don't understand since the holes that were manufactured into the piece behind the arms aligned the piece perfectly. I am going to have to use one of the...

Thanks. My roll servo is toast. Fortunately I have an Align 500 setting around that I am not using right now so I took two of the DS510's out for now. They are not quite as fast as the Savox but then I don't have to wait for them to show up and I can complete my build.

Ken it looks good!. Two questions, one what were the permanent fixes other than the servos and two, what settings are you using for the camera mount?

I just use the 3M outdoor double sided tape. It has a little cushion but not like the foam pads.

DJI says yes. Before the PMU I powered my MU with all my esc's connected and did not have any overheating problems. Now I am doing a new build of a 500 sized quad and I am using an ArduCoptor PDB. The esc's plug into the board and it has a four lead plug from the PDB to the FC and a separate...

I am using a Dx8 and found that I could adjust the Throttle by the sub trim to get the motors to spin on startup to work for me. I do use Throttle Hold when connecting the Lipo and when shutting down just for safety.

I have used Vario AH on my MK since I first built it. The AH on the WK-M seemed like second nature to me and I found it easy to use and adapt to. I was never comfortable with the AH by switch. You will get used to it in a short period.

Ken: Found your build answered most of my questions, http://www.multirotorforums.com/showthread.php?1157-Wookong-M-on-Quad-(Build-Thread)&p=12193&viewfull=1#post12193, I am still interested in your experience with the Savox servos.

Ken: I am doing a similar build. I will be interested in seeing how the Savox servos work for you. What settings and hardware are you currently using? My build includes RCTimer 2830/14, EPP 10x4.5, Turnegy Plush 30A, 2x3S 2200mAh. I would like to go to 4S and am considering 11x3.8 props...