Search results

will the zenmuse even accomodate the GH2? I thought it was nex5n with the pancake lens ONLY? So even with the Nex you are confined to not using anything but a super wide angle lens. Agreed what I have seen is amazing but..... I guess everything has it's strengths.

It's hard to do, but imagine you are in their shoes. You have made amazing physical products and have a strong reputation. Then you dive into the software realm and things dont go perfectly the first time around. You can be sure they are going to test the ever loving hell out of this next...

I found a folder of old DJI woo-chang firmwares. if anyone needs the older versions, gimme a PM. I can email them to you. Looks like I have all the way back to 1.20

I was told by Kim that they have a beta for the solution. I volunteered to be a guinea pig for the test firmware. They are going to make sure it is well tested before saying anything this time around, and i dont blame them.

Red would be appropriate since the Chinese associate it with good luck.

I shoot in auto all the time for some reason, i guess it so rarely misses my focal point that i am happy. But yes, the gentled triggers it ok. My problem with teh gentled is that it wont trigger a single shot, i can only get it to activate a 2 or 5 second intervalometer mode. This is actually...

Yeah, my Y6 weighs 7.75lbs AUW. BUT, mine flies great with 11x5's top and bottom and I know a handful of others than can attest to this as well.

they wont be soon. I dont think most realized how good a Y6 could fly. It's better in every way except a little efficiency loss. Better in wind, better FOV, easier to pack in the car, can use larger props, WAY easier to tell orientation in the air, weighs less, redundancy. Am I missing...

My Y6 flies best with Graupner 11x5. You dont want too much lift. It would be nice to try different pitches for a coax but I cant see the Y6 flying much better. Its more of a controller issue at that point. I do however plan on trying the Xoar 12x5/12x7 on my XY8 as that is lifting much...

Heres a first test of my setup using the skyline on an av200/360.

droider made a hint in the 5.12 thread about hitting default and re entering the values. I would not have thought of doing this but worth a shot.

Has anyone heard of any updates from PH? I thought the gimbal would be ok from ground tests but now that I actually flew it, i can see mroe problems. the roll drifts and the jitters everyone is speaking of are prevalent in the video. As lanzo just said, even if you tirn the gains all the way...

I dont know about the 3s max theory for xt60's. The higher the voltage the lower the current, right? I've been using them on my Y6 with 2 4000 4s on avrotos/11x5, 12x3.8's no problem. I realize if one battery fails I am not accounting for that but I am pretty sure they will be ok. I am also...

I didnt think to hit default since the numbers were all still there. Is that really necessary? As for the gimbal, dont do it for that, it is still useless. Gains do the same thing, kinda stuck around 20-25 or else it over compensates in roll. The speed is messed up on the tilt override IMO...

thanks dirtbag! :) I actually had the blubeams on my last rig and I think I made it about 30' before all transmission broke. This is the 3rd time around, I am either extremely unlucky or doing something majorly wrong! Also, I tried using this with the radio control off to make sure it wasnt...

Kloner, i need your help. this is the 3rd time I have purchased a vtx and rx for FPV and I can still not get more than 20' away without it cutting out. I only want this for LOS second person camera operation, nothing more. I got the new immersion 5.8 600mw tx and an uno rx. Using stock...

if you have the cinestar 6 use that frame for the XY8. now you have 120 deg FOV. i have this with 14" props and they dont show up with my nex at 18mm. If you are doing forward flight AND you rotate the gimbal you will see props though. but most fast forward shots dont require the gimbal to...

I just did a test run with my XY8 using Tiger 2814/11 and APC 14"x4.7's on 4s and they are hotter than they have ever been. of course I usually run smaller props with a much larger load. but now I am lifting 4lbs of additional weight. the av200/360 with all its accessories and just a nex5n...

I use a Lilliput 8". was a little under $200.

Dave, I did have a few crashes on the software now that I think about it. but just starting it back up was ok. No big deal to me as long as she flies right, and she did.