Search results

most batteries shouldnt be charged at more than 5c. I actually drop my charge rate down to 4amps just to be safe. I know they can take it but if I am not in a hurry why max it out. But yes, you are fine, you dont need to match the charge to the MAh of the battery.

Please excuse my flagrant disregard for authority.

I'm using the JR 9503 and I have a very healthy throttle curve between 30 and 80%. The expos are at 40%. Seems to be about as good as I need it. What's really amazing to me about what Hoverfly did with the sensitivity bar is that it flies really smoothly but still had enough authority at the...

The Cinestar is way over marketed. The only reason to get the cinestar over the DW is for the gimbal. And their gimbal is pretty nice. but i agree, that Quadrocopter advertises being able to easily detach the arms when in reality you still need to loosen at least 4 bolts per arm and...

I had 2 weird motors as well in my RTF f450 kit. You just have to be very gentle with the usb/power module. I wouldnt fly anything if it started smoking if you're asking me. Call robert at uavproducts.

those units seem to be very poorly made. I have had 3 of them. 3rd time around was a charm. But annoying and not confidence inducing at all. Here's a tip I was telling people back when I had one. File your usb connector down on the cable. those small barbs are pointless and can actually...

I think if you word it just as you have it in that quoted sentence, it will be easier for most than what's currently there. I'm gonna sell all my DJI stuff and buy all Hoverfly pro's. I'm totally sold. Can you guys make me a single rotor heli auto le vel that works as well? :) now that we...

Yeah, I think some of it is all CG though. its hard to tell since it is low def. but things like the stadium are definitely all CG, you can tell by the shadows and lines on some things. but amazing none the less.

All joking aside, this is some pretty amazing stuff. I dont know why it is only low def. Almost hard to tell if it is CG, other than tha plane of course.

Hey, maybe if you stick a DJI controller on that robotic sub, it would come out of the water and fly!

I use tiger 2814's and APC SF 12" and 14" but i prefer the 12" I still feel like 14's are too much for a 2814. 4s.

what firmware? i had this problem as well on 5.06. It seems to have subsided on the newer firmwares. But it was tricky as too high a gain made the yaw twitch from being too sensitive and too low it would just erratically yaw up to 90deg.

A friend wants to collaborate on filming some sailing races using Zephyrs instead of helis. I guess less risk and easier to get a nice fly by over the event. some questions: 1. When flying fpv can you use the gopro only if it doesnt show the wing in the frame for orientation? On the heli...

6s alone makes a huge difference. What motors are you using? The hex we used on Gymkhana had 6s and the motors were hacker motors each enough to power a 450/500 size heli. It also had 16" props. The heli itself weighed close to 25lbs AUW! we would get 7-8 minutes with 12000mah. I really...

For what is worth, I used the assistant to match the numbers once I got eh manual gain right. So 40 on the TX was equivalent to say 43, so i made the other value 43 on the AL mode regardless of what it was on the tx. And I still got that little glitch when switching. It always made me...

So we just got the fs700 in our hands and i am wondering what you pros out there would feel comfortable using to lift it. I have a Naza F450 with stock props, but I dipped the props in epoxy so they should be stronger. Kidding. Seriously though, is this a SRH only application when we start...

The DJI output is slightly faster but it still sucks. the hoverfly is the way to go. I slapped it on my av200 and it works amazingly well. I never even tuned the thing. No 3 BEC's, shocks, felt washers, H-harnesses, firmware upgrades, 3 batteries, etc. it just does what it is supposed to...

But Al is saying we DONT have to use the assistant to set it correctly, so why would you want to see the numbers at all? Not getting this.

I think what happened, at least with me, was I called to ask about this and you guys verbally told us to do it in the assistant. So the mixed messages were what made it awkward. Then the +/- debate on which one was actually correct was confusing as well. It's one of those things where once...

How do you fit the hdmi cable in the camera.