Search results

yes that helps, I thought the number behind the IMU would be a negative however when I looked closely at the diagram they show in the assistant app, they show they're sample position behind right and did not use a negitive in the x figure. The z value on the GPS I would have never figure out...

I am looking for a little help, on my quad copter I am trying to figure out my x offset number for the GPS placement. My quad is in an x fashion, so with that said if my gps is 7 cm behind the CG point would the x number be a -X (negative) or X (positive) number. The way I would think of it...

I have my quad, xaircraft frame, wk-m, avroto 2814, apc 11.4.5 props, and 6600mAh thunder power battery. It weighing in at 2380g and, I am currently getting right around 11 and half min before it hits its first battery threshold (10.45V), if I let it go I can get somewhere around 12:15 to 12:30...

why not, here's what I got from my new flights with my xaircraft http://www.youtube.com/watch?v=pv30ke7Jnpc

Thanks Jesper, IP cameras can be increased to over 1000ft - 3000ft, and with my computer I can create a portable hub which would bring the video wright into my laptop which would be nice, but I am not sold on the idea its just me toying around in my head. I have been looking around and have...

good stuff guys I just want to say thanks, I find the information help and good to know.

I am trying to figure a simple lightweight, video downlink for my Qaudcopter. No knowing good ways of doing this I am looking for any information/advice out there. I am toying with an IP camera but understand it will run on a 2.4G freq. I am not sure if that would be wise since I have a...

Does anyone have any information on the mounts, I am wondering how much tilt angle, weight in grams, and vibration. Please weigh in

Flight time on my qaud with the Avroto motors. 11.1 lipo Battery time and threshold test. Battery: Thunderpower 3s – 5000mha – 400g Copter: wk-m, Xaircraft frame, Avroto 2814 motors, MayTech 30amp ESCs, sony hx9v camera total weight just under 2300g So basically I was...

Terry ya, I went from 8 to 4, I mainly made that decision from conversations I have had from people around the net. As a few said, it usually is not the motors or esc's that fail, its usually a bad soldering or something else. I also read somewhere that some guy had used something like 40 of...

Ya - I had some issues I was seeing with my x650v8 but after getting to a point where I did not trust the craft I decided to take a bigger plunge, I went out and purchased a wookong-m. At that time I had to up grade the esc, however even after that, although it flew fine with no payload once I...

rwilabee - put up a posting last week about basic gain setting and as I read through it I started wondering what people are doing on their end. Please chime in, I look forward in hearing about it. thanks you Jack

Just curious, I am trying to get myself into the ball park so I can set myself self up to be safe while getting the max out of my flying. Currently I am at 10.65 on the first and 10.4 for self landing, not sure if that is good, bad, or somewhere in between. Cheers all

I had a similar experience, no idea why but, since then my voltage draw seems to be off. Still trying to figure it out especially in the voltage draw.

I am hear to listen and be educated, overall I would like redundancy, keeping it as a octo, but I am not totally against going down to a quad, I just don't know enough about motors and esc readabilities, so if one fails in flight I would like to have a safety cushion. I thought of going with the...

Ok going back into what I did, on my 11.1 battery (thunder power 5000 c45 - heavy) but i am getting about 11 min out of if, i have set my first threshold to 10.85 and my second to 10.6 at, 1900g Its doing fine, however when I was at 2250g its probably best to click those numbers up 2 - 3 tenths...

Thanks for the responses, I am wondering what other are setting the voltage meter warnings at. I am planning to start exploring the thresholds to figure out flight time and warnings. A tuning process, I will be calling it.

Gestatltung good stuff thanks for the breakdown.

Fail safe question This has nothing to do with my previous crash post, I am looking for a little better explanation of how the failsafe function works on the WK-M. I programmed the fail safe option to a switch, so I could test it out and see what it does. I was flying my quad at about 6 feet...

Not a bad one it happen about 8 feet from the ground but it was kinda weird so I have some questions. The first one has to do with battery voltage and when on a 11.1v what would be a good voltage to land the system. I ask this mainly because of the way the crash happened, it seemed that the...