Search results

Yes the polarity of the bateries was wrong. ON i charger it is hard to charge 2 bateries at the same time. U need to check the balancing ports and bateries are connected as they should. Since othervise u blov out the balancing pic on the 1 balancing port wich is connected to the ground to the 2...

We taught we would give u Axi cause the new shipment with MK4 motors was in customs so we didn't want our customers to wait so we replaced them with axi. When we heard about your problem we were suprised that they changed the holes to simetrical. I think u alredy resolved this with Krleas.

In our experience if u have a kit with motors, then its motor fault. Dont ask me why but we changed 3x naza and same problems. Flip of death. After changing esc, no luck. When we replaced motors all the trubles went away. With diferent kind ofc.

here and manuals and instructions also http://www.rotorpics.com/

Its more than 10 min with this setup. More than enough.

Fly over people ?? few runs over maybe 3 people underneath , i wouldnt't call that flying over people.

Hello. This threads are based on a few members on the forum so it is not fair to judge one company. We all know that somethimes we order something and we dont get it asap. It hapenes. Well support is another big thing some like to abuse. For instance if u buy a video link and u dont know how to...

Finnaly picloc works great.

HAHAHAHAHA. We gonna try to pull out maximum from our skyjib. This is gonna be fun and aerodrive board will be hott again :)

With a little help from our Friend (the owner of the photo) the picture was removed from the site. He will not do that anymore :). Everybody else should do the same. Glad its over.

Boris we are doing our best. Yea the service TNT provides now is good. They respond fast with pickups and delivery. Hope it stays that way.

Hello, This looks funy but i guess this is realy a servo problem. Tried on 2 servos and none off them behave like yours does. Too bad u dont have a servo tester so u could test it. But it looks like the servo is bad. Maybe some loose conection or bad joint. Hope jeff can send u a new servo...

Hello!! I see Jeff has alreedy posted the video on how to. It is usually the trim problem. I dont think he is missing the servo poti brick :). Let us know if u dont fix it. If u dont, pls explain in what channel of the reciver did u plu it in and what transmiter/reciver are u using.

Hahaha Boris, I am glad u noticed it and posted it. I try to keep an eye on the stuff like that.

Yea man u have the clips from draganfly to almost all the guys here that do great work in multirotor comunity. Think you should at least ask for permition before u post it. The middle picture in http://www.eyeintheskyaerialphotography.com/#!__purchase has to be removed from the page. This is a...

Sunday was beautifull so we got our 2 actors in the air and shoot some video in our back yard. We had fun testing so at the end we made a video. Cinestar 8 and Skyjib X6 shot by red scarlet, gh2, nex 7 .... https://vimeo.com/39163234 Hope u enjoy it. Kopterworx team

OUR DRONES NOW HAVE THE ABILITY TO BE CONTROLED UP TO 15 MILES AWAY !! This is a little long distance :) otherwise i like the domain name :)

I cant register the naza on internet and hook it up to pc. DOes someone know what to do. What ports do u need to have open for it. Never had problems with internet but now i cant login to naza software. Pls Help

We often use ppm for FC and then 1 or 2 normal RX chanels for servos. Like for liting the legs on Skyjib or other stuff. Glad to help out.

Ofc u can use 3 chanels from rx and ppm for the hely. But be carefull that u dont use same channels. I would use the 2 poti buttons on the graupner for tilt and roll or pan.