Search results

Graupner MC32 is a good way to go also. Transmiter for life.

i suggest you start with something smaller first and then work your way up.

Guys, This is common problem with all stabilization out there. So dont blame the guys who are working hard to get this fixed. THis is the problem with acceleration with tilt, roll and pan corection. I belive there is a solution for this just around the corner.

Do you ship to europe. We would buy it.

Who is flying with it. And if you could write so we can folow up later if any flips happen so we can compare data. Frame - Motors - esc- So we have some info if something goes wrong (we hope it will not :black_eyed: )

For 4120/20s 6s is because they in my opinion dont get enough RPM with 5s. We have compared both options with lots off diferent propelers and best option for 5 to 10 kg is 6s. On 5s on same load the kopter is not so responsive, current is higher .... We tried all props up to 17x7. No big...

The way you heat the cable from top is not good. It takes too long and then all the solger material goes in the cable under the insulation. And it makes the cable stiff in the insulated part also. Cable must be horizontal, not vertical. By the way the ec5 is more like 50 amp conector. If you...

The way you heat the cable from top is not good. It takes too long and then all the solger material goes in the cable under the insulation. And it makes the cable stiff in the insulated part also. Cable must be horizontal, not vertical. Othervise it is good for newbies :)

HAHAHA i am glad we insipe others. Well we have a lot off aces in our sleave. Stay tuned :)

Here you have a lot off videos and pictures of flying x8 formations. http://www.facebook.com/home.php#!/pages/Kopterworx/264645063570963

On dji if you want to have different props you need to do manual mixer for motors.

Well i am reading this and i think if you realy need the retractables then just redo the original ones. You take away the plastic holder of 2 booms and install 2x servo, 1 on each leg and do some aluminum cradle for them to slide. It should not take more than few hours to do it and coneect the...

Ansewrs in blue

DJI wokong with nview has this option avalible.

I would like to say that it takes time and time to learn how to do it all and to make beautifull shots. I suggest that u start to learn slowly and progress and at the end buy a bigger kopter once you are totaly familiar with the multirotor world. FOr the batteries and charger i would buy a 3s...

5d or fs100 3kg weight. on what motor are we talking now. i said 5s is not for qc motors with that frame. and 2kg is max safe payload. with 1x 8000 4s battery. if you want 2 batt. then 2x 5800 since weight is an issue. Kw 8 is 5s ofc. and 3 kg easy payload.

2x 8000 5s in my opinion is wrong battery. too heavy for your motors and too much rpm for 5s on props. 2 batt are 2.2kg and that is too much. i woulg go 4s 5800 2x.

50 amps would do it also since both motors peak from 30 to 35. Kw8 will be out off stock soon if ppl will keep asking for them. we will order next batch but might take time again. othervise this setup has proven good for more than 3kg setup easy.

As i wrote 3 weeks would be the answer. +-1day .

It isnt 4k