Search results

cinestar and 16 inch ??? i need to check but i think its not doable. Too big props for it. I never tried hoverfly i cant comment. Radian is expensive but works like charm with cs360. Mx16 for operator. Mx12 is not enough. Cinestar 8 can handle 15in props (1000mm diameter)

16 inch does not fit. 15 is maximum i think. Radian stabilization for frefely mount. U need seperate batery suply 5v for it. ULTRA DUO PLUS 60 is 10 amp maximum charge. I think on 6s even less than 10amp. So charging a 8000mha battery with 10 amps would take forewer. From 80min up to 100min per...

Hey, Me and MAtjaz were just talking about that. We should make a chart with motors, props and payload and always mark what we test so we could also do comparison with other types. I dont have any chart at the moment. Just a memory in the head on what worx with what. I will try to cover this...

Well looks ok but i dont trust another component that could fail in between my batery and board. The thing i had in mind was more

Power switch for 200amps. you need to stop thinking about it since the first that comes to my mind is about 2kg in weight. Sory but cant be done if you ask me.

Just to let you know mt 3515 and kw10 are not the same motors. You need to read KW8. Kw10 have bigger bearings than kw8 so there is no need. And motor smoothness is not because off bearings but from magnet poles and how pricise are they and how many you have. And how well the prop shaft and...

I confirm that we have our own mixer for DJI that is is the same as MK okto X configuration.

We never stated that KW10 is equal to axi 4120 since they are different in size and weight. KW10 have around 750 wat and are 185g ws AXI 320g. KW10 maximum eficency is 10-25 amps while axi has 13-37amps. So you can do the math on how much power you get from KW10. And we have 2 same kopters ...

HAHAHAHAHA This post made my morning :) Btw KW8 paint black tigers that we have have 3 bearings and not 2. But at the end our black painted tiger motors are flying all over the world without any crash so far as i cant say that for orbit. I know a lot off crashes with orbit motors.

Good job Swarch :) keep the progress comming.

Yes power draw is 2x since we meashure only 1 board. But 200amps hoover is more than enough. 200 amps /8 motors is 25amp which is perfect maximum load for kw10. Well kw10 can draw 35amps for 30 sec. I think that 10kg maximum payload is more than enough. Unless someone needs to lift the...

1x Graupner LiPo 2S/2300 probably for gimball 1x Photohigher PRO AV-200 for RED EPIC + AV200 enlarged tray 4x Lipo Akku ULTIMATE 5000mAh 5S1P 18,5V 45C/90C Or GensAce 10000mha 6s to be used in pairs. 1x Copter Deluxe UBEC 4A CC bec 10 amp 4x XOAR 15x5" propeller pair in wood Or xoar 16x6 if...

Well i can probably say that Kopterworx built more skyjibs 5kg capable then all together. This is just to explain that i know off what i am talking. I am just stating that if you have a lot off experience in this field you could do it in 2 months. Since after it is build there are a lot off...

Flying with red and prime lenses is not a joke. Since red in your case will be the price x2 or 3 off the helikopter. I suggest that you do not cut the budget on kopter since from my experience it has never been good. YOu need to get some system that has proven to work and handle with red. There...

Hello, You have at least 4 totaly wrong items. Mx12 will not work att all. And for cameraman the remote has to be good to make nice slow motion. 4s with tiget 3515 is a nogo. For lifting 5kg you need 5s or 6s 8000mha or more for 8 min flight per 2xbattery. chargers. With your charger you will...

http://www.youtube.com/watch?v=yA747xqTnh4&feature=youtu.be Here is the video. Sory for quality but i made it with phone. YOu can see atti going on and off while i moove sticks. PPM jitter and present on almost all reciver tranmiters i have tried.

Dont use it with ppm unless you have a good graupner reciver with no ppm jitter. Othervise when you moove sticks it can drop from altitude mode or gps to no mode when jitter is present. I would go normal wire for each channel. I will post wideo on what hapenes with ppm and jitter.

Well since diferent result is given on diferent prop. Kw10 can go up to 4kg with 17inch. I hope we can next time putt same videos with props so we can put the info under specification. Easyer for buyers to decide on props then.

As CrisViperM said. +1 There is no best and no worst. Its just what you need and how well it performs. There are many + and - on both sides. We buidlt and tried them all and i can say that if it is set up right and it works, then its worth the money. Personally i love cinestar mount for its...

Flying red on cinestar in no big deal, but not on stock motors like our kw4, qc or axi ones. You need more power to be safe, Othervise even big pl primes are no big deal but you need to balance it perfectly. We build and tested at least 3 diferent configurations which were red capable. It is...