Search results

My guess is about 4-5+ minutes.

My guess is that you have two channels reversed. Check your Throttle and Elevator.

I was getting inaccurate reporting on my A2 and installed a lipo sensor and then calibrated the battery via the A2 App. I did a manual calibration and I have not had an issue since then. You may want to try it.

I am using the TBM 21,000 lipo. I land at 21.3v. I am getting more time than that on my 15,000 lipos.

The good news was that I was in LA when this came out. I was able to grab a returned Inspire and do the upgrade according to the instructions contained in the Zip file. There were no issues for either the Inspire or the Tx. I will state that I formatted both cards and did a clean install of...

You cannot go back. The firmware checking will only allow newer firmware to be installed.

My suggestion is not to upgrade right now.

Make sure that this is a last resort. Some users have bricked their H3 trying to do the reset. If the reloading of the firmware does not work, keep trying. It has taken many attempts on the part of some users.

We have been getting reports from dealers and users that they cannot get video out with the Android App v1.0.7. I was able to confirm this while here at our offices in LA. No video on my Galaxy S4 and then connected an iPad mini to the same Tx and video was there. I would advise that you not...

I think I need to quote you. Nice analysis that in my opinion is unbiased.

I am talking about the GH4 gimbal not necessarily the camera. You have the option of setting the output. Full HD mode is 1080i, smooth is 720p and real time is also 720p but at a lesser frame rate. The camera is always set at 1080p. I use Smooth most of the time. I have been out over 1km...

Have you turned off all other applications? Have you put the iPad in Airplane mode? How are your antennas mounted on both the Air unit and the Ground unit. Are your channels set to automatic and the video quality set to Smooth? I have my antennas mounted on the legs so they point straight...

We are always looking at new tech.

Note that the DJI LA Center will be closed on Friday February 13th for system upgrades and the 16th for Presidents day. All services other than our call center will be available on the 13th.

Now you all have your iOS App. The next version of the firmware is coming soon. Enjoy.

@econfy that is $159 for the 4500mAh lipos and $199 for the 5700mAh lipos. That is not that much in my opinion after paying over $400 for lipos for my S900 that can only get close to the Inspire lipo performance. It is all relative.

Tim, thank you for providing that information and analysis. R&D has designed a new HDMI Board and Cable that eliminates the low temperature problem. Please contact DJI directly. China is sending replacement boards and cables to the US, Germany and Japan. They can arrange for the board and...

You have to power cycle the A2 and then it should show up. I remember on the beta units we had a similar issue. I will not have my production unit until tomorrow.

I got mine from DJI on Wednesday. I doubt if I will ever use them.

Can you send me the SN of your unit? I have informed DJI and they would like to research the issue. Thank you.