Search results

I assume this is required if one cannot see the mouse pointer or needs to react very quickly without taking eyes off the MR. But I also noticed the following statement from one of the free macro recorder websites: Observation: to work properly Macro Recorder needs that screen windows have the...

After initial boot-up, flip your Attitude switch into GPS mode. If the blinking is correct for GPS and no red flashes, then your MR should have found it's proper new home point location and there should be no reason for the MR to drift after takeoff provided it is in GPS mode. If it is in...

Mine also came from the Arizona distributor and there was not mention of the need to acquire a new serial number by them or the Mesa Hobby shop at time of purchase. So after much troubleshooting I realized I had to request from them, the updated serial number to enable the "free" single waypoint...

Step 1: When hardwire connected to your WKM from your PC, go back to the "Tool" option in your WKM Assistant sofware and determine from there if your new WKM serial number appears in the lower right corner of the firmware upgrade screen. If it appears there, then this is not the issue with...

I swapped the position of two motor on my MR and the ability to achieve calibration became available again. However the drift issue is still there...... manageable but still a nuisance as I have to reconnect to my Naza Assistant once again after every 5 or 6 flights to recalibrate. Othwerwise...

Question 7: This was a common problem we encountered while commissioning remote gas well sites in the winter in the GWN, i.e., Canada. The bright sun especially when the ground was covered with snow made the PC screens nearly impossible to see even from inside an SUV. I believe that the...

There are multiple options for the use of X1 and X2 but when mapped to F1 and F2 of your Naza controller they are used for gimbal control. U channel should be configured to a 3 way switch on your transmitter so that you can switch between flight control modes: Manual, Attitude or GPS-Attitude...

If the GCS can't find the serial number you will get the "permission denied" message. I assume that you updated your WKM serial number to enable the single waypoint or the upgraded waypoint capability. C heck to see again if the new serial number provided by DJI is still embedded in the WKM.....

Answers: Q3: Yes..... the NAZA gets power from the connections to the NAZA (whether by individual channels or by using s.bus) Q2: Align your Transmitter default channels with the defaults required by the NAZA controller as per the following diagram (it's in the NAZA manual)

You need to provide more detailed information: a) Are you using Naza Assistant and NAZA hardware? b) Did you get your two joysticks calibrated in NAZA assistant so that they all appear as green pointers and centered? c) What is this red box you are talking about? d) Can you upload a screen...

Re: The Blue Tracker!!! Here is a better option but for a bit more money......http://www.bigredbee.com/BeeLineGPS.htm (available for 433 Mhz or 900 Mhz fhss and other options). some require a HAM radio license though. Or jump up the the DJI Ground Control Station which has the tracking built-in...

I had similar issues the first time. But later I tried it again..... a) flipped switch multiple times under the green led flashed rapidly. b) put the switch in the IOC off position c) Moved the MR about 70 feet away from the POI point d) Flipped switch into POI mode Immediately the MR rotated...

thinwing - thanks... Excellent info on the Beldin coax..... I have Basic + but the next level up for Canada would be Advanced, if I recall correctly...... I am not going to get in to morse code and don't need to go there with present requirements...... having too much fun with MRs etc.

Europe uses 900 Mhz cell phone frequencies extensively (called GMS or GSM) but North America has moved away from 900 Mhz for cell phone communication. Regardless of the frequencies cell phone towers use, the high wattage transmitters will stamp all over lower wattage radios that are tooooo...

The IEEE indicate USB was developed for PC peripherals and the limitation on cable distance to be 15 feet for the firewire variant of USB and possibly less for standard USB. Additional attenuation of the signal and loss of voltage will also occur on the longer cables. And there is only 5 volts...

Yves..... The DJI Google Earth Plug-in modifies Google Earth for the DJI China test lab location ip address...... try this.........but be careful...... the file you modify must not have an extension so use edit.com or some other simple editor that does not force you to accept an extension...

It is smart enough to know that the driver (good or bad) is installed...... so you must proceed to un-install the driver before you attempt a re-install. Windos OS may also want to install a communications driver before or after this driver install. Let it do it's thing. Also as per original...

Response to questions A and B.... Never try to power a device with a voltage that is higher or lower than the range specified. If voltage is too high, you will eventually burn out your electronics. I f it is too low your electronics will only work at full charge briefly then move into the...

Yves..... The DJI Google Earth Plug-in modifies Google Earth for the DJI China test lab location ip address...... try this.........but be careful...... the file you modify must not have an extension so use edit.com or some other simple editor that does not force you to accept an extension...

Yves.... I had the same problem but was able to fix it..... will get back to you asap with the solution I used.....looking now......