Search results

Yes.. eBay special heat sinks and the paste from Micro Center... I cut squares that fit the heat sinks into the shrink wrap and removed the label to reveal the original heat sink.. The frame comes with the Power distro. Pre soldiered leads using a high temp torch. It is SERIOUSLY a great...

Ok guys, quite a few of you have asked for pictures of my finished Hexacrafter X8 Coax, SO here it is. If you have never seen a Hexacrafter frame, they are a top notch, 100% professional, top-of-the-line, you can't really do better, multirotor frame. They are designed locally here in Ohio and...

You can do both. But what you want to set your GAINS to is what ever they do to make the craft as smooth as possible. Then taylor your expo to your flying style. Personally I find flying with around 35 - 40% expo on a smooth flying machine really makes for a smooth AV machine.

Ahh. Ok. well there are several companies that make a "shutter release" that you can control with a channel on your radio.This one supports up to 100 cameras: http://store.fpvbox.com/index.php?route=product/product&product_id=70 Then for the video, you would use the HDMI output of the camera...

And when dealing with these companies to add the Production Insurance, you HAVE to specify that you are flying the cameras. Many normal insurance planes that seem reasonable have a "no fly" clause. So either everyone on SET is on the same page "Fell off the jib" or make sure the insurance you...

When you file your 333 paperwork, you can include several airframes. Each one mush have it's own N numbers.

There are several companies who offered different levels of insurance. Several offer liability only meaning only what your machine hits would be covered and a few offer actual rig insurance where your rig is covered. Liability insurance can run from $117 - $250 a month, and I have heard "full...

Hi, Well it all depends on what you want to do. An S1000 with a NEX Zenmuse gimbal you can program the shutter release through the gimbal. Other gimbals, you would have to provide your own control. Most of us shooting video just hit record when we start the flight, that's really not a big...

Ok, first off, your using the 4S props (8"x4.5) while running a 3S battery. You would want to run 10" x 4.5 while running a 3S battery. Also what is the total weight of your rig. I think your tuning problems could come from the fact that you had the wrong props on. Switch props and start the...

No with the listed VTX, you can wire it directly into your main battery through your power distro board. The VTX can handle 3S - 6S voltage!

5.8 would be fine. And is small and easily put on any size rig. it will give you plenty of distance. If you have a monitor, thn you would just need the VTX and the VRX. This is a very nice VTX that is reliable and can take 3S - 6S power input...

Daniel, Check out this site they have proven and reliable FPV starter kits that are all put together for you. READYMADERC Just click that link, you can choose your frequency and then look at the available packages. From budget to baller.

10 stops of light. :( I thought it was 13 like the BMPCC

I have 3 rigs with Avroto's GREAT motors. So smooth, operate cool and fall right within the listed specs. Also Jim from MontoRC is a great guy to deal with and really stands behind his product. Each one of his motors is hand tested, and boxed locally, so you are getting a GOOD motor. My...

Holy crap, that's the cam man..... if it works like they say, it's ON. I'm trying to find money.... sell a kidney, a liver....

This is a huge factor. Freefly Systems know that many professionals use their gear, and when something goes down, the production must go on. I have had friends who were overnighted parts or even an entire unit to finish the work. That's HUGE when you paycheck counts on it!

If you do a search there are a lot of opinions but here are the facts. 1) Coax = smaller. To run powerful motors and 18" props on a Hex it would need to be around 1150 - 1200mm And octo I think 1300mm. You can run 18" props on a 700mm Coax. Easy to transport compared to a GIANT octo. 2) Coax...

SuperX, but yes Falcon/Vulcan X8, Avroto 3515's Spyder 50 Amp esc's.. Also, was able to make a tiny cord (red and blue) and run it to a 4S pack to power the BMPCC which made the camera last 4 hours instead of 15 minutes. :D

Ok guys used the H6 with a BMPCC cam today for a Cub Cadet shoot. It was pretty much flawless. 2 man operation, 45 flights (1 - 4 min each) Low to the ground, following, turning, the whole 9. I am impressed!

Not, I have seen several like this, and there is a thread where if you search for it here on MRF where a guy asked if he could run 18" props on a 700mm Hex if he ran the motors like that which would make the prop tips overlap by 1/2" but since they were 1 up 1 down, it allowed it.