Search results

Up for grabs i'm putting my tan rmrc 1.3 video receiver w/ 1258 and w/ saw filter. Since i'm switching over to 2.4, i'm gonna let all of it go with my CP antenna collection for it. includes 1x 4 lobe cloverleaf, 1x crosshair and 1x 4.5 turn helical and 2 side feed video transmitter 3 lobe...

raphaels the best!!!!

transmitters are on sale for $50 at readymade. I took 3.......

Have any of you guys ever done any single rotor fpv? Anybody use ace1 from dji? I'm curious how hard ace1 is to setup and make work as well as a naza or the like and what all it doesn't like as in if theres any servos it won't do or types of helis it doesn't work so well with. looking at an...

need one of these multi rotors http://www.nbcnews.com/technology/futureoftech/hover-bike-lets-you-drive-jedi-956125

So i bought my daughter a rmrc sky surfer, built it all up with eagle tree osd pro, RTH, etc. took it outside with her, tossed it up and it flew great, but my wife was calling off rssi and it was crap, 53, 10, 90, i was like wtf. tried bringing it down my runway (driveway) and came in a little...

Again this is that $49 case with a 16" naxa 12v monitor frenched in. I'll be building it over the next couple days and wanted to start a thread on it along the way. This one will have a false floor like the battery charging case but to hold, store antennas and other video gear. it'll use the...

I'm gonna be building my charger case and wanted to share with you guys. this is a pair o the dell 700 watt 12 volt server power supplies modded and ran in series to make 1400 watts at 24v, around $30 invested in them. makes a 1kw charger run all of 1kw. it seems to run around 1200 watts, guess...

Looking for some help in fine tuning a gimble off the naza. It's a direct drive tilt gimble with a high end digital hitec servo. i also have the servos programer that controls it's end points, deadband width and speed. the servo is running .11 sec. the gimble gain is down around 14 and i got...

I couldn't find the thread with the guys talking about getting props ready for the stock motors, but this is how kloner preps his. i use a step drill, like the old unibit and i come in from the top just till the top two steps are gone leaving the origional precission 8mm hole untouched so when...

So i've never been much of an extras guy. showing up with the hot heli has always been no problem blowing cash on, but i'll show up in cheap wal mart tubs or cases i bought 20 years ago, well that just changed. Was just sick of how i'm traveling with all this gear on my boat so decided to do...

For those that aren't hanging out at fpvlab to find out these things, trappy is offering graupner 9x5 on his store for $24.00 a set of four, that's $6 a prop. of course he's in austria so shipping is $15, but if you got 2 sets your already money ahead compared to v-east. They get me for $20+...

I've got the Digital 1.3 rx with saw filter upgrade along with the 1.3 300mw vtx with both types of antennas. the vtx flew once, the receiver has been used a few trips. if i had to guess, it's been turned on less than 2 hours. Looking to get $75 for both shipped.

I've got the first frame i blew up for sale. Comes with new red posts and all the bolts that come in the kit. the damage is detailed in the pics below. Basicaly it burned a trace up in the core area but otherwise totaly functions. This would make a great LOS frame for somebody $30 shipped...

The fpv gods shined a light on me yesterday and gave up my second Disco from customs. Got everything swapped over but this time it gets 2.4 video, no external osd and it gets the dji GPS. I sure hope this all works. heading down to painted gorge sunday to try this thing out. having the core pre...

Got the rx and tx today. Since they were due in, i blew off workin and went to home depot for some supplies. Got some poplar strips and some 3/16 copper roll. I'm hard on the gear down there and didn't want it to be fragille, and the roll is suppose to be better. Wasn't that much money...

have any of you guys ever used a hero 960? I fly that mode in fpv on a hero2 and not sure what all differences there are? is this thing like a hero1 in how the video looks? better or worse? there down to $120, seems like a good way to go on fpv craft where the camera is unprotected and flying...

i've got 10 grey, 2 black gws 3 blade 10x6x3 props. These fit anything but were used on a dji f450. there better than stock, won't explode cause they got a massive hub and they fly great. $15 to your door. these feel and fly like 10x5 2 blade props. Amperage draw is the same

I've got a dji f330 frame, 3 hobbywing 18 amp and 3 rctimer 18 amp esc's along with 4 dji 2215 motors. it all still flies good. the esc mismatch doesn't have any affect on it flying, flew great with naza but it's in a new home so this thing is collecting dust. frame is clean, 2 of the esc's are...

got one of these today...... other than the $ems only shipping, it was a pretty good deal. The picture is super clear, reminds me of looking through goggles being the 22" monitor is a little rough being 640x480 resolution and so big. This one is 800x600 and 1/3 the size. Anyway, colors are true...