Search results

When will RCTimer clone one of those S100's? :livid:

Hi, I am considering buying a Zenmuse Z15 and reading through the Zenmuse manual I see that it specifies either the Nex-5N or 5R, I presume that this will work with the 5K(first version). Can anybody confirm? Thanks

Hi, Just wondering what others do with there HDMI Cables if using a NEX camera with HDMI. I have tried a standard HDMI Min to HDMI to an AV Converter but I seams that the HDMI cable is too stiff and can effect the Brushless Gimbal. Stripping off the black outer cable helps may this more...

You can switch between two cameras with the IOSD both showing the OSD information with only one transmitter, If you want dual displays at the same time then you will need a second transmitter + receiver and screen but OSD can only be on one as it has two Video inputs and one Video output for...

Hi and Welcome, I had a similar issue but this was due to the motors, I moved by DJI motors to a new airframe but the screws were too long and shorted out the coils on the motors causing the same effect. If you are 100% sure that this is only coming from one ESC the best way is to replace it...

I have the Tarot 960, for the motors i would recommend the Tarot 4114/320kv, with 10,000mah battery you should achieve 15 Mins.

Thanks for the Response Chris, You are correct about what you have said and those resistors do get very hot!!! I will install a BEC to power these, I was just taking the easy way to avoid lots of wiring, as the ESC are at near he motors and i was just tapping into the same power feed. Andy

Hi All, I got my self a couple of these super bright LED's, 2 White for the front and 2 Red for the rear. Working on the principle that I will be driving these from my 4S pack I also got some high power ceramic 47ohm resistors. Based on Ohms law I calculate with that they should each draw...

I dropped by F550 into fresh water for about 1 minute, I was able to wade in and get it. I made sure everything was dry first before I put power back to it. The main thing is the ESC, these trap water inside the heat shrink tubing against the FETS. I cut off the tubing and removed the...

What size is the Gimbal tray?

Let it update, it should put a fresh version of the firmware onto the naza so this the rules out if this is the problem. The reason that I suggest to put a new version on the Firmware on is because I had the same issue but with APM2.5 (not a Naza). When I uploaded the software to the APM...

Certainly if it is front heavy this will not make things any easier, try to re position your battery further back to compensate.

If you are not using the latest firmware then you can just upgrade another way would be to downgrade (test flight) and then re upgrade using below 1. Start the NAZA Assistant, go to Upgrade 2. Click on the blue text (No updates) next to Firmware e.g. 3.1 in the assistant under info. A pop-up...

It seams that if it still has the problem with the GPS disconnected the location of the GPS in the software should have no effect. I would look at the following 1) Re flash the naza with firmware 2) Ensure that from the software you are really moving from Manual to Att to GPS modes and...

Hi, I am currently flying the Tarot 680 and have just received the tarot 910, this is a great improvement over the 680 and rock solid when put together. I have not flown this yet and am still completing the build but so far i am impressed. BR Andy

I have been in China about 13 years now in the Shanghai area. Although there are some shops around I do not find that they are that competitive. The main place I buy my gear is Taobao.com (think ebay on steroids) . If you can get some one with an account to buy what you need and get it sent...

Ordered the FY960 with the legs, gimbal mount and battery tray, should be here tomorrow. I will let you know how it goes but I will not be able to build until I get back to the UK. Andy

Now you have done it!!! I am going to have to get the 960, I was quite happy with my 680 but the arms do flex a bit. I considered reenforcing the arms with some small CF bar 3mm and a carbon wrap but seeing how strong the 810 and the 960 look I will just be easy to get this. From the photos...

Hi Jack, I am just looking at this as I have the 680 version and the arms have too much flex, Apart from the 810 version there is also a 960 version. http://www.0577mx.com/products_view.asp?id=4307 For your photos it looks like you have a second base plate installed under the main body where...

Added photo