Search results

Yes this seam to be the case that on the boundary limit it only has throttle and yaw control. There are a few youtube clips about it to compare with what happened to your machine.

I suspect this is a NAZA issue reaching the out of bounds position, what happens is that you reach the horizontal out of bounds and you only have control over throttle and yaw, all other controls seam to be disabled? Does this sound about right? I know that DJI real eased a new firm are to...

Not meaning to state the obvious but you need something to set the waypoint, iPad 3 or higher. After the update of the naza you should be able to connect from the iPad

From the video it sounds like motors are surging while the copter swings back and forth, could have been anything from a bad arm connection, broken prop or ESC or just too much vibration.

What voltage battery are you using? if this is 3S or 4S then the KV of the motors should be fine, the stock DJI ones are 920KV, the size of the motor is larger in comparison. If you are running 4S then look at changing to a 8inch prop to give less lift. Things to check, 1) Are you flying in...

The original link was part of the amazing race footage, only the caption was anything to do with phantom batteries, I think it is from 2005?? This is the clip of the best breakdowns of the amazing race staring Colin, http://youtu.be/Rc1wlBdM8mg Look at 1:40 and 2:15 "My OX is broken", I...

Yes, Switching to Atti will regain control, make sure your throttle is mid stick before switching, if not you will cut the throttle.

I never knew he was in the amazing race, just look for the Youtube clip "Leaked video of the first ever Naza fly-away" A.K.A "My ox is broken!" video. http://youtu.be/50PIM1wuiPs Classic

I have also used this with the A2 after the BETA firmware release and this is working fine. I did try using the failsafe during a waypoint set and although it showed FS & Waypoint in my IOSD it continued on the Waypoint mission. I guess that while it is on a mission FS is disabled until the...

I cannot see clearly from the picture but which way is your GPS pointing? The cable exit from the GPS is towards the front of the MR

I would not complicate it with separate speakers and amps, take something existing http://www.amazon.com/gp/product/B002PAZZM6/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=1535523702&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B007UHG1F4&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=071AJ92M8WKPFS1G5AS1 It weights nearly...

Sorry, it was about a different matter, due to the old DJI assistant app for the iPhone which they pulled the day later

Just report it under the Ace1 section, they replied after about 24 hrs

is the Hobby King Decorder the same as the Frsky? I tried with the FRSky and could not get it to read the DG channels, after contacting customer support they confirmed this and said they would add it to a future release.

Welcome ShangahiPhil, I spend half my time in Suzhou so may be we will meet up some day, back again in November Point 1 - I would make he investment if you are going to be putting expensive kit on it, I noticed a difference from moving from a NAZA to a A2 (some people have had bad experience...

The two DG or On/Off channels can be used for landing gear or shutter. I tried to use these from SBUS with the FRsky decoder but they cannot be accessed with this, the only way i found to do this was with the Futaba Decoder and the USB software. This way you can use the full 14 Channels of...

The T8FG has 12 "analog" channels and 2 digital channels The Hobby King or FRSky can only program normal analogue channels not the 2 DG channels on the T8FSG Super, while the Futaba Decoder allows you to decode the DG channels by the USB dongle

Most Lipo's have some padding around the corners, I suspect you will be safe. Check the voltages when charging and look for any puffing of the lipo. If it stats to puff then you are our of luck.

Hi Rainman, How is a 6S any different to 2 x 3S connected in series, the only difference I see is that the manufacture configured the 6S while the user configured the 2x 3S, there are the obvious issues with the additional connectors but what else? Thanks

There are also 2 digital channels that I used with the 8FG, These I use for the camera shutter and Forward /Down