Search results

Ever flown in a 70 km/h storm ? I did, wanted to tune my Skyline today, but there was to much wind to fly.. still did it.. :nevreness: Offcourse it was to much to tune the skyline, but the level of the video still amazed me, because I was flying constant in min. 45 degrees to not let it fly...

Levels are all 100% after auto tune, and camera also balanced on tray, and middle lens on height. Should I try the gains on the bottom of the software? I did not understand it 100% about the overshooting etc..

Here you can see a test from today with the 1.2.2. and dummy pots, on my (non-pan) av-200, tilt gain 150, roll gain 180 the rest on stock settings.. Not-bad, I did just some rough flying, in medium wind, can't trace all the movements I did. On descending lots off movements off-course.. But...

I am upgrading my Skyline today with the new wires and software.. However with the older firmware's I had a problem, wich I suppose will still be the there: How to use tilt on my Graupner mx-20 ? I made a switch so I can use my second mx-12 for the operator, so we can use a "stick"...

I could only find 2,3 k resistors.. Will this be a problem, less good ?

Hi welcome, I was in Ascona last week ! @Seven.. ! Great place, been there a lot with my parents, and now I was back with wife and kid ! Greetings from Holland, Jasper

Sorry for being so impatient... (hate to do that.. :dejection:) but can someone please sent it ? Thanks in advance ! EDIT !! : GOT IT ! RO is going to send it to me ! Thanks RO ! (lld)

Can someone please send me 1.1.7 ? Over pm first. I think I am going to use it for a shoot in a few hours.. I did some shoots with 1.1.3 with VERY low gains, working quiet good.. but today there is a bit more wind, so maybe I can benefit of 1.1.7 with a bit higher gains.. But have to update...

Maybe I overlooked, and its already posted.. ..but Photohigher has a new video with the v1.1.7 on vimeo.. http://vimeo.com/47061457

Edit/ ps.; I understand It can not solve a non straight horizon, but I mean some small servo jitter on horizon/roll.. !

Hi, I am going to try maybe some different option, but untill now I am using Magix videodeluxe. It has mercalli stabilizer, but did not use it enough to know exactly. But what kind of movements can do the better stabilizers get rid of? Also when I have some small horizon movements for example...

I am very happy with my Skyline, and have nice results with it, however I also do still have some Jitter / Movements I tried different Bec's, and Ferrite rings in cables etc.. but still have Jitter, don't know if my servo's get warm.. don't think it's that bad. But you can see it in...

Thanks for reply, and I understand i need a smaller separate for the gimbal etc.. But there is no way to mount ONE MAIN battery somewhere, and still be in balance, looking at pictures I think not , but maybe there is?

Hi, I am thinking about upgrading to a 360 mount for my av-200, and maybe for my smaller hexa on a av-130. Now I am using the stock Droidworx HLE landinggear, and always use ONE lipo behind the cameramount on the rail , and everything is in balance like that. Because I already invested...

I will be patient, but still want to use it until then.. But now I know it just works like that ! Thanks to clear that up ! And yes it works the same, with a pot, but it was a bit strange to get use to it.. 1st flight my camera was hanging 90 degree to the ground, when flying time was over...

Well, I did read the manual, and video, which are very good.. And I discovered it works like you did describe above, but did not know it was simply not possible yet to do it like on the MK. I think it is not working very fine.. especially on a knob of my mx20, maybe I can set it up with a...

Well, I want to use Tilt input ! but i think you mean it has to come directly out of the reciever.., and not through the flightcontrl. ?

Well.. Today I did the calibration etc. following the new instructions.. Jitter looks a little bit less.. but did not fly it yet. And I thought I maybe had slew mode activated but it was not.. on and off, my tilt does not work as I want. But maybe I need to take servo 3 or 4 in MK CAMERA tab...

I will try today !

I did not had roll connected to my reciever yesterday with my succesfull testflight.. so I don't know. @Photohigher, the new instructions look good and complete to me.. and the procedure is a bit different from what I did, So maybe I can get the Jitter away.. And from what I read I must have...