Search results

It was Aerial Media Pros, who i find to be lacking in the response department until you call and say this is my 3rd time in 2 months complaining about this problem then Patrick will get back to you to say, Ive never heard of any problems with the SimonK and our Maytechs.. BULL$%#$ Aerial Media...

This is what I am looking at getting http://www.castlecreations.com/products/phoenix-edge-hv.html everyone seems to be having no issue with them on the freeflyforum

<iframe src="//player.vimeo.com/video/98702037" width="500" height="281" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe> <p>Maytech 65A-OPTO with T-motors U7 420Kv Sync issue from <a href="http://vimeo.com/cinematicdigitalmedia">Cinematic Digital Media</a> on...

I am having problems with U7's and Maytech 65A-opto, our copter fell out of the air yesterday <iframe src="//player.vimeo.com/video/98601240" width="500" height="281" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe> <p>T-motors U7, Maytech 65A-OPTO Flip of...

I have emailed both Aerial Media Pros(where I purchased) and Maytech, both say nothing is wrong with the ESC's

Maxwelltub, The link does not work

I was taking it up fast just for tests, The motors are cool and have never gotten past slight warm. As you can see from the photo, the esc's have been modded with heatsinks and fans which keep them under 105f. T-motors also at first recommended just the T40A esc for these motors and after many...

U7/Maytech 65A-opto Crash I have a X8 and X4 Mega lifter with U7's, Maytech 65A ESC's modded with heatsinks and fans. The X8 is running a WKM and flys very nice at 26 lbs. The X4 is on a A2 controller. The X4 crashed yesterday and I think the problem is the U7's with the SimonK Maytech 65A-opto...

I dont have the answer for all of your questions Getting rid of Arc is easy, you need to either buy anti spark connectors or make your own connection with a resistor to slowly charge up the ESC caps instead of allowing them it have a huge inrush of voltage. I have a power distro setup in the...

1/16 g10 is not close to strong enough for your load if you want a solid airframe. I think 4mm is what we used on your plates, same as cine star I have a mikrocopter hl with g10 and a cine star gimbal under and it's pushing it

As with most electrical devices their is a duty rating and you exceeded your esc's. Almost all esc's can only take about 10 seconds of full throttle for ever minute of usage. Your manufacturer should have specs on this, I know castle creations does. Don't show off with your copter, or someone...

I have put it in several locations dependent on battery location. if you locate your battery on the top plate then use the gps stand to move it up and away. make sure to twist your battery wires and wrap with aluminum duck tape on high amperage copters to stop the compass from getting pulled one...

Can't wait to get a set on my disco with T-motors 3110 780 kv and 10 X 4.5 carbon props, should solve the problem Im having with the short stock arms.\ The dirt biking shots are really cool, just wish the disco had a 3rd axis to enable a follow mode to smooth out the Yaw jumps

Can you please video and upload a flight so we can determine the problem?

very cool how that functions, I will forward this to the other DJI support guys here in the US

go with the futaba, it has clean PPM signal if you ever want to go LRS (Spektrum PPM has a bad signal) the T8J is a great one on ebay with receiver for like 245 shipped

Wow, I never thought of that kind of redundancy configuration. I have some comments about your system (which is very cool) -Why use a Herkules with a wkm? mikrokopter fc with the herkules and the right radio would give you all telemetry as well as Consumption which is a huge plus. If Dji made...

I see that your trying to change direction of the motors and am wondering why, alot of people are flying X8's with the stock rotation direction and it works great. If you do want to change the direction of the motors, you can just reverse 2 of the motor wires into the esc out of the 3 and that...

Yes, Here are tutorials http://www.youtube.com/watch?v=7t9nT3Hn9b0&list=PLW-Z2Yv9jLwxM0XL7F8zErDskBETiGBev http://www.youtube.com/watch?v=MnldHRtjre8

DO NOT EXTEND THE DC SUPPLY SIDE WIRES, only extend the motor wires. http://castlecreations.com/products/cc-cap-pack.html please do some reading and you will understand why. If you extend the motor wires, use the same gauge and do not use bullet connectors to extend, solder the connection