Search results

Just great....Albert Einstein of plumbing supplies Copters Chris

Looks cool....a brushless conversion kit for the Cinestar 3-Axis gimbal (if properly done) would be an absolute killer. Chris

Hey Doug Here you will find all answeres: http://www.multirotorforums.com/showthread.php?11211-NAZA-V2-Hardware-hands-on-! Chris

Oh my god....is that you, Keith : Chris

I had the same proplem.....check the yellow circles on the pic: Just make your settings and then hit ""EXPORT"...a window will pop up and you will be asked to give it a name...I name my settings like: no_wind....slight_wind.....gust_wind....whatever you like. If you want to change, just...

The Futaba S-Bus2 IS ONLY FOR TELEMETRY SENSORS....it will never "work" connected to a flight controller.... Chris

I have a strong gut feeling that the latest Firmware is developed/optimized around the new IMU V2.....although it does not do the lop-top away, but I have a few sets of tested settings exported to disk. If the wind changes, I just hook up the WooKong and import the matching setting...

This frame is just absolutely great.....and looks 100x better than blow-up doll Phantom.....DJI should let you run their design department :tennis: Chris

Thanks a lot for sharing....best find in a looooong time. I've been looking for a dynamic balancer for ages, but all i found so for was mainly for industrial applications and lots of $$$$$. The procedure seems to be the hell of a pain in the butt, but on the other hand the time you invest will...

You can get it here (although you sit in Iowa and the shop is in Europe): http://www.kopterworx.com/New-prduct-in-Shop-May/View-all-products It says "Preorder", but I am pretty sure they have it on stock already...... That was indeed my question, but I think this is cleared now.....just...

A couple of weeks ago I did the same.....unfortunately I am not at home to have a look to be sure, but from what I remember the smaller silver screws are TORX screws.....if they look like: If they look like that: than you need something like this...

Cool.....just wondering if inside the V2 is the same hardware (gyros, chips) like the "old" version, since you can flash the lastest firmware on both....in that case someone would only need the new PMU and LED ....at least acording to this...

....someone should mount 30" props on each of his arms and legs, put a WooKong in his mouth and the GPS-pole right up his arse, and then hit "Return to home"....preferably DJI props, will make his trip to China more exiting "....pleas don't snap....plese dont snap....please don't...

If you want to make sure your problem is not related to vibrations, try to mount the NAZA with some Moongel: http://www.rtom.com/moongel.htm It doesn't stick as solid as double-sided tape, but it won't come off while flying....also the best stuff ever to get rid of jello on cameras....2...

Peter, since the new NAZA Assistant software/Firmware is out and the possibility to use it on either the NAZA V1 or the NAZA V2, give that a try. I suspect your IMU needs a re-calibration, and the new firmware got a much better calibrating tool...

Thanks guys for all the input.... Just a few facts about my bird: It's a Team Blacksheep Discovery, Motors/ESC's are from here: http://www.kopterworx.com/TBS-Motor/TBS-KW2-motor-set, props are from Graupner, 9x5 and 10x5, motors and props are perfectly balanced, tried 4S and 3S Lipo's in...

For everyone who wants to go back to a previous firmware on IMU v1 (I recommend 5.16) read here: http://www.multirotorforums.com/showthread.php?11127-Need-5-16-Firmware Don't forget: Wookong-M Assistant should match firmware when going back to previos firmwares.... Chris

Good morning.....I guess with remote gain adjustment you meant to use one or two knobs/sliders on your Tx and set it to any gain channel via X2 or/and X3....yes, I did that, but only to get the required gains a bit more convenient than hooking and un-hooking the WooKong 100 times in an hour to...

Was just about to go to bed.....I use it on a S800 (damn bird) and hardly change anything on the gains.....took a while to get it right, but once set, I only change the gains (with a small Laptop) for more serious wind. Remote gain tuning will come once the BT-LED is here. Chris

Thanks....but no need for floor wax....will get Italian marble...but a few boxes of Kleenex arround the work-shop might be needed.... Chris