Recent content by rameshtahlan

Problem solved Jeti Radios have facility to change Pulse Width, so i changed it from Auto to 22 ms. The Tarot X6 retract is working perfect.

I also checked the assigned channel with a servo, and it works perfect. only for some reason Tarot X6 retract controller does not seem to read the signal from the Jeti Rx I did get a reply from Jeti, that I could change the pulse width for a particular channel. so will try that also.

violetwolf, yes, have reached that many times. Correct channel assigned. frankly speaking, it should work with any radio.

Hi guys. I have the Tarot X6 retractable landing gear which is servoless, and has its own controller for up and down. All my multicopters are set up on Jeti DS16 The retracts won't operate, the green light keep flashing indicating that no signal from Rx. However, on JR DSMX 11 the retracts work...

Morris, you cannot use a standard USB cable. Zerouav has its own USB cable that has a circuit attached to it. take a look at the image,, the usb connector has a long circuit board, inside that black heat shrink So you will have to write to zerouav to sent you one, or if someone in you area or...

SleepyC, great to hear that with Futaba 8FG the problems went away, surprising, cause all expensive radios have centre stick pulse as 1.5ms rock on so the make of radios that are top brands and expensive should not really matter. my problem is still not solved in spite of the z1400 having been...

Deanmachine, zerouav tells me that they have not heard of this horizon tilt problem before from anyone... ???? and only I seem to be having this problem and i have been in aeromodeling hobby for past 45 years. and got into multicopters 8 years ago, and have even made my own gimbal and...

From what i see.... zerouav is making inroads into Europe and USA.

my Tarot GoPro gimbal has never misbehaved. My DJI N15 for NEX7, has never ever misbehaved. I am beginning to believe, that zerouav is a hit and try system, those guys who got a good gimbals, are just lucky. My luck has been crap... first Z2000 kept going back to be fixed, now same with...

The one solution that zerouav gave me for my drift in Pan and Tilt is this frequently keep selecting the Camera mode sw on Tx from position 1 to middle. someone please expelling this logic to me, so my camera is drifting in the air, and i select middle position on cam radio and gimbal quickly...

guys, my gimbal went back for repairs cause of yaw and tilt drifting, its come back, and they say its perfect, but it still has problems. each time i sent it back it costs me $250 if i keep sending it back i might as well buy the DJI gimbal and in any case, the good brand radio all have...

Ok. what i have found is that Z1400 worked a bit better with 14MZ with straight Sbus, and today i tried the 14SG and it showed improvement, in that the Pan axis seemed to be rock still but Tilt axis was drifting, but half as much as with 14SG. So looks like i must give 8FG a try may be the Tilt...

SleepyC. that is correct . since it is all gyros and accelerometers, no trims or sub firms all are zero. My system is all zerouav. Gemini for the HighOne, and z1400 ... so since its all zerouav,,, all this should really not happen I was using JR DSMX11, with a PWM to Sbus convertor so...

z1400 gimbal finally had to be sent back to zerouav got it back a few days ago. same problem exists. on ground when u move throttle forward for gimbal to power up. it drifts. take a look at the video if someone has a solution do post it here. I doubt zerouav has a solution, cause they say they...

Great to hear that guys... the Gemini Controller is working fine, its the Gimbal that was giving problems of random jerks in tilt and pan. anyway, its back to zerouav for fixing for past 23 days. hopefully in the coming week they should be sending it back