Tarot X6 retractable landing gear problem

rameshtahlan

rameshtahlan

Member
Hi guys.

I have the Tarot X6 retractable landing gear which is servoless, and has its own controller for up and down.
All my multicopters are set up on Jeti DS16
The retracts won't operate, the green light keep flashing indicating that no signal from Rx.
However,
on JR DSMX 11 the retracts work perfect, and the green light indication is also good.
So i hooked up on Jeti again.
no luck, the retracts won't operate.
And i ordered 2 sets of these retracts.
Jeti DS15 is 2048 resolution, so could that be an issue,
is there any way of getting it to work on Jeti.
 


rameshtahlan

rameshtahlan

Member
violetwolf,
yes, have reached that many times. Correct channel assigned.
frankly speaking, it should work with any radio.
 

rameshtahlan

rameshtahlan

Member
I also checked the assigned channel with a servo, and it works perfect.
only for some reason Tarot X6 retract controller does not seem to read the signal from the Jeti Rx

I did get a reply from Jeti, that I could change the pulse width for a particular channel.
so will try that also.
 

rameshtahlan

rameshtahlan

Member
Problem solved
Jeti Radios have facility to change Pulse Width,
so i changed it from Auto to 22 ms.

The Tarot X6 retract is working perfect.
 


You must log in or register to reply here.
Top