Need to replace motors F450, whats good w/o spending 70 bucks a piece

E

Elliott000

Member
Got a firm reminder this morning to always check prop nuts pre flight lol, flew a few feet past myself and straight into a cement retaining wall... 1 motor took the brunt of the damage the rest kinda disintigrated on impact, Needless to say i need a new motor, should i stick with the DJI's. Whaty are some of u guys putting on for aftermarket motors? Itll b on 3s 4000mah gopro possibly a FPV setup if i manage my money right, I dont want to spend more than 50 USD per motor.
Thanks for any info
 



M

mailman35

Member
sunnysky's 2814's 1250kv or suppro 2814's both are around 30$ and will require a dremel to widen the hole at base in the arm, (minor) but well worth it, as the stock motors just seem to lack the punch they need.
 

E

Elliott000

Member
yea, not to pumped on the stokkers especially after ive set up as kloner has with a gopro on my 450 and 4s, flies fine but could be better lol. Can the sunnyskys or suppro's take 4s?
 


J

jamienz

Member
I Have the Sunnysky 2216 from Foxtechs on my F550 (replacing stock DJI motors). MUCH better than the stock motors and run on 4S fine.
 

GotHeliRC

GotHeliRC

http://gothelirc.com

Attachments

  • windings.jpg
    windings.jpg
    64.5 KB · Views: 372
  • ipower_motor_opened.jpg
    ipower_motor_opened.jpg
    72.1 KB · Views: 424



E

Elliott000

Member
Im goin for tony the Tigers, ill report back how they are, b ordering in a few days

Sent from my GT-I9100M using Tapatalk
 

M

mailman35

Member
nice let me know, i was between the 2814 tigers, the 2814 sunnyskys, and the 2814 suppros, i got 2 of them 3 now :p
just need to build and fly :p
 

L

Lifter

Member
Elliott000 said:
Got a firm reminder this morning to always check prop nuts pre flight lol, flew a few feet past myself and straight into a cement retaining wall... 1 motor took the brunt of the damage the rest kinda disintigrated on impact, Needless to say i need a new motor, should i stick with the DJI's. Whaty are some of u guys putting on for aftermarket motors? Itll b on 3s 4000mah gopro possibly a FPV setup if i manage my money right, I dont want to spend more than 50 USD per motor.
Thanks for any info
Click to expand...

Try these $107.95 for four, wound for 4s, takes a triple or 2 blade http://www.multiwiicopter.com/products/sku-1
Cheers
 

kloner

kloner

Aerial DP
775kv, yikes, i'd have to run them on 5s or 6s to have fun

I switched over to the 2214 1000kv suppo brand and am loving it. I'll show ya why monday morning
018%20%281024x768%29_795.jpg


I haven't totaly got to lean it forward to see the actual numbers, but i think it gained 15-20 mph in atti. kinda a big deal with this fpv thing i'm doin. Accelerates like a rocket and i've never seen it so stable
 

You must log in or register to reply here.
Top