@ddmt i will get you the weight infos a little later.
@ Jess111 well that exactly what they are planning but in a strange way
---------------
DJI Response the altered ESCs
a new firmware that can let you choose weather you want to optimize for position hold or attitude hold will be out in less than 2 weeks.
and also, in current firmware, most people still get very satisfying result in windy condition even for AP. most people who does not get perfect result from WKM is because of the wrong esc, motor, props, voltage combination, that's why we are developing our own ESC, and will sell in combo with motor and prop, which can provide thrust at about 700g each(@70% throttle), at the same time get 9 g/w efficiency
---------------
Response from some very cool RCgroups Forum guy.
Frank you guys have to consider that for a full blown AP platform additional weight automatically will be added. People want some form of Vid downlink. Preferred option is a second receiver (for things like slew mode) for the camera mount control and not a student teacher setup. Additional i guess your GH2 3 axis gimbal includes a basic lens. If we step into the area of wide angle or basic teles you can add another 300 to 500 grams. Either the outcome will be very restrictive plattform what the customers can install on the copter or you will approach 80 % + throttle to get the bird in the air. I can tell you that a 20% throttle reserve for taking up camera equipment that can be worth up to 2000 $ 3000 $ will be a rough one for people who love their equipment !
-----------------
HI Boris,
higher lifting power can be achieved too, but with lower efficiency.
Frank
-----------------
What this comes down to is that there will not be a suitable solution for real heavy lift setups 30A will not be enough.