need help with ezosd

Tomstoy2

Tomstoy2

Member
Here's the deal.
Got myself an ezosd with 100A current sensor.
When I first powered up I got the display but no voltage display. I am running a Boscam fpv system which has different pin out than FatShark. I missed the power swap on one of the cables and ended up shorting out the sensor.
While waiting for a replacement I uploaded the sensor calibration firmware and tried to see if the problem with the sensor was in there. It wouldn't let me do anything with the bad sensor so uploaded the TBS firmware.
The error screen would not go away, " error; current sensor diagnostics 2.1.
I could not get back to the main display screen.

Today, I received the new sensor and installed it. I hooked back up to the pcu.
The error has now disappeared but I can not get out of the diagnostics screen.
Went back in and uploaded the loader fw 1.3(?) along with the TBS fw 1.2.
I still can not get back to the normal display.
What am I doing wrong?
 




Tomstoy2

Tomstoy2

Member
This is the damn screen I am trying to get out of,,,,
 

Attachments

  • P1070002.jpg
    P1070002.jpg
    137.7 KB · Views: 266

kloner

kloner

Aerial DP
I've never set one up but i know where theres a pile of guys eager to answer,,,,,, fpv labs immersion rc forum....
 



Tomstoy2

Tomstoy2

Member
No, using the buttons to navigate, I can select, using the center button, I can navigate the cal and write default selections. Up or down change the value. The bottom line is just that, fw and rev#.
 

kloner

kloner

Aerial DP
sob, no setup on a pc that can take it past all that i take it. I've never owned one of them gadgets, probably only immersion thing i haven't bought
 

Sac D

Sac D

Hard Landing Specialist
I've had the same for a while, but never realized there is calibration firmware!
Let us know when you find out...
 

Tomstoy2

Tomstoy2

Member
Nice to know I'm not the only one in the world that has this!!!
I have a support ticket in with TBS t have yet to hear back from them.
If I ever do get it sorted I definitely will post it up.
 


Tomstoy2

Tomstoy2

Member
Well, yeah, but it's one of those things that they say I must deal with my dealer. I planned on giving it a few more days. If no answer form TBS then I can include all that to Immeirson.
 

Tomstoy2

Tomstoy2

Member
Well, the more I thought about it the more I decided that ol' Kloner was right, just contact Immerison themselves. Not the easiest thing. To do. Finally I found an email address on their website, ( not even linked ), and sent them an email.
Their response, just go down to the bottom of the page and press exit. I can see already that this. Is going to be an interresting conversation!

In the mean time, after submitting another support ticket with TBS, I received a new email from them saying that they are sending me out another osd!
That's good.

In the mean time I will continue to pursue this with Immerison as I know the osd works, I just need to figuer out what the hell?

I do have another osd coming, besides the TBS one. It was to go onto a plane I intend to build for long range fpv.
Ill make damn sure to post the results of what transpires. I know of at least one other person that is stuck on this, too.
 

Tomstoy2

Tomstoy2

Member
Just to let everybody know I have resolved the problem, after a few emails with ImmerisonRC.

Seems that the files I had downloaded previously had gotten corrupted, possibly by running the calibration firmware.
I deleted all the files, downloaded them again and installed.
Worked like a charm!
 




You must log in or register to reply here.
Top